@Tizkit, you have it correctly there.
Regarding the transport, you can in fact load the transport. Sea zone is still friendly. You just can’t unload the transport to a hostile territory without an escorting warship. Not sure what prevents warship(s) from leaving the sea zone on NCM after such a escort adventure.
@Tizkit what exactly do you mean with.
The sz contains Multiple Warships and an enemy submarine?
If you are at war with the enemy submarine, then you can’t load the TT unless you are about to perform an amphib asssault somewhere else.
You may move out an in your ships into this sz, but as allready clarified in combat moving phase.
Split them up if you want to leave units to destroy the SS while moving out with other units.
Think about it, If you really need to kill the SS.
Because the Main reason for this sub might only be to prevent you from loading TT('s) to move in NCM.
Therefore you need to kill it to be able to load next round your TT.
Hth.
I suppose that’s also a valid point. If you attack the submarine, the transport will have participated in the battle and can’t leave, unless it has done an amphibious assault somewhere else.
@aequitas-et-veritas said in Global 2nd edition Q+A ( AAG40.2):
The sz contains Multiple Warships and an enemy submarine?
I read it as meaning friendly or neutral warships.
Pardon, but if there is an enemy submarine, I thought we can’t load the transport because its tagged as a combat zone?
I thought you’d have to leave the sea zone with the transport, then load.
The presence of an enemy submarine does not make the seazone hostile. So the “Sea units starting in hostile seazones-rules” do not apply.
But from the FAQ we read:
Q. If some of my units begin my turn in a sea zone with enemy submarines and/or transports and I decide to attack them, can I move some or all of my units out of the sea zone in combat movement to avoid having them participate in the combat?
A. Yes. Even though the sea zone is not hostile (it contains no enemy surface warships), you can still move units from the sea zone in combat movement to escape combat if you’re attacking there. However, you must still respect the rules for moving units in the Combat Move phase to escape combat.
This means that in the situation in question, units leaving the sea zone in combat movement to avoid participation in the attack can actually end their movement in friendly zones, so transports that are leaving don’t have to participate in an amphibious assault.
In case you decide to engage the submarine you can do it, but every unit in that seazone that did not perform an alternative combat move will be part of the battle then.
A transport can also load to perform an amphibious assault. It needs an escort in case it unloads in a seazone that contains an enemy submarine.
Don't always trust TripleA when it comes to rules questions. Know the rules before you start … and better check what TripleA has done.
@weddingsinger said in Global 2nd edition Q+A ( AAG40.2):
The main issue is ships must move on the combat move phase rather than wait for non combat and if the zone becomes a combat zone, you couldn’t pass through it while making moves on the combat turn.
The latter part of this statement (in italics) isn’t true. Even though combat will be occurring, the zone is still friendly, so there is no hindrance to moving through it in combat movement.
@Panther said in Global 2nd edition Q+A ( AAG40.2):
A transport can also load to perform an amphibious assault.
To be clear, this is the only case in which a transport could load in this situation, as loading in combat movement is allowed only for an amphibious assault. If the transport is simply moving away to avoid combat, it may not load.
But what if there’s a cruiser with transport ?
The transport should be able to load in combat and go to another territory Subs should not block any surface ships. If Cruiser stays then its Combat with sub but transport left before the cruiser stayed or was determined it was staying to attack
@weddingsinger said in Global 2nd edition Q+A ( AAG40.2):
Pardon, but if there is an enemy submarine, I thought we can’t load the transport because its tagged as a combat zone?
I thought you’d have to leave the sea zone with the transport, then load.
Nup. You can load the transport on combat movement. If there’s no combat, you can also load it on non combat movement.
It’s a friendly sea zone because it contains no enemy surface warships. You can load units in any friendly sea zone. I can look that up if you need it.
Oh right. I see others have already answered.
@Panther said in Global 2nd edition Q+A ( AAG40.2):
This means that in the situation in question, units leaving the sea zone in combat movement to avoid participation in the attack can actually end their movement in friendly zones, so transports that are leaving don’t have to participate in an amphibious assault.
Am I getting confused? If there’s only a sub opposing you, the rules about starting in a hostile sea zone don’t apply. So the transport could only leave if it was conducting an amphibious assault somewhere. Assume you’re following black letter law.
Pretty sure we discussed that not long ago.
@SS-GEN said in Global 2nd edition Q+A ( AAG40.2):
But what if there’s a cruiser with transport ?
The transport should be able to load in combat and go to another territory Subs should not block any surface ships. If Cruiser stays then its Combat with sub but transport left before the cruiser stayed or was determined it was staying to attack
A friendly cruiser? That changes nothing. The transport can’t move on combat movement unless it’s conducting an amphibious assault or leaving a hostile sea zone, as with all transports and the latter rule doesn’t apply.
@simon33 said in Global 2nd edition Q+A ( AAG40.2):
Am I getting confused?
Maybe.
If there’s only a sub opposing you, the rules about starting in a hostile sea zone don’t apply.
Correct.
So the transport could only leave if it was conducting an amphibious assault somewhere. Assume you’re following black letter law.
Nope. The FAQ entry @Panther quoted above allows units in this situation to move away from the sea zone in combat movement even if they are moving to a friendly zone, just as if the original zone were hostile. The key is that the rules for moving in combat movement to escape combat apply. These are outlined at the top of page 13 in the Europe Rulebook, and state that units doing so may end their move in a friendly sea zone.
The implication for transports is that they may move away without participating in an amphibious assault. However, they may not load, since a transport may load in combat movement only when participating in an amphibious assault.
Ok. Thanks for that. That’s an improvement.
Sorry didn’t mean to cause more confusion.
So if it’s a Cruiser instead of a transport, the Cruiser can leave same sea zone as sub in combat move then ?
Yes, as long as other units are attacking the sub. Of course, if you’re not attacking the sub, there’s no reason for the cruiser to leave in combat movement, other than to attack somewhere else.
@Krieghund said in Global 2nd edition Q+A ( AAG40.2):
Yes, as long as other units are attacking the sub. Of course, if you’re not attacking the sub, there’s no reason for the cruiser to leave in combat movement, other than to attack somewhere else.
Right but then the transport should get same move. That’s like a double standard is my point.
Should be the same for all ships leaving sz to another combat whether transport loaded or not.
It is the same for all sea units leaving to attack somewhere else, as they behave normally. It’s only different for transports leaving to not attack somewhere else. It’s the price you pay for attacking the sub.
Therefor prep your self and load your TT’s when a sub is arround.😉
@Krieghund said in Global 2nd edition Q+A ( AAG40.2):
It is the same for all sea units leaving to attack somewhere else, as they behave normally. It’s only different for transports leaving to not attack somewhere else. It’s the price you pay for attacking the sub.
So this tells me a transport can load and leave in combat to attack somewhere else
So basically it’s a form of a combat when Transports load in same sea zone as sub but can’t leave. Don’t agree with that. But of course this is for thaaaattttt g40 game.
@SS-GEN said in Global 2nd edition Q+A ( AAG40.2):
So this tells me a transport can load and leave in combat to attack somewhere else
Yes, if the sea zone is friendly, as it would be if only enemy subs and/or transports are there.
So basically it’s a form of a combat when Transports load in same sea zone as sub but can’t leave. Don’t agree with that. But of course this is for thaaaattttt g40 game.
I don’t understand what you’re saying here. Why can’t they leave? The sea zone is friendly, so they can do whatever they want. The only restrictions are that if the sub is being attacked, they must either leave or participate in that attack , and if they leave they can’t load unless they’re making an amphibious assault.
@Krieghund said in Global 2nd edition Q+A ( AAG40.2):
@SS-GEN said in Global 2nd edition Q+A ( AAG40.2):
So this tells me a transport can load and leave in combat to attack somewhere else
Yes, if the sea zone is friendly, as it would be if only enemy subs and/or transports are there.
So basically it’s a form of a combat when Transports load in same sea zone as sub but can’t leave. Don’t agree with that. But of course this is for thaaaattttt g40 game.
I don’t understand what you’re saying here. Why can’t they leave? The sea zone is friendly, so they can do whatever they want. The only restrictions are that if the sub is being attacked, they must either leave or participate in that attack , and if they leave they can’t load unless they’re making an amphibious assault.
The sub is not being attacked. What I read was if I’m correct if the transport wants to load and leave it can’t because of the sub. Then I’m not reading right. Ok. Then
