Strategy Guide Global 1940

@MM1940

Well done!

@runaway_jim

I am of no relation to him. Likely just a similar appreciation of the movie Gunga Din.

All fair points. I look forward to your upcoming house rule releases!

The problem with 1936 is that Com China is so weak at the start of 1936 that KMT can easily destroy them within two turns and USSR can’t do anything about it since they can’t Lend-Lease due to Com China not boarding USSR.

@bfreestone2002 What’s been going on since then? :)

@Argothair:

I think I’m shooting for something in between those two extremes, Caesar. We have a rough idea of the manpower reserves of each nation – so maybe nations can only purchase X infantry per turn at the low cost of 3 IPCs per unit, and then after that they have to pay a higher cost of 3.5 IPCs or 4 IPCs per unit? And then X can vary by nation based on what we know about the nations’ manpower.

E.g.
China – 20 infantry / turn
Russia – 18 infantry / turn
America – 16 infantry / turn
UK Pacific – 14 infantry / turn
Germany – 12 infantry / turn
Japan – 10 infantry / turn
UK Europe – 8 infantry / turn
Italy, France, ANZAC – 6 infantry / turn

I’m not saying that’s accurate; that’s just an illustration of the level of detail that interests me. Other players might be interested in more detail or less detail than that.

Not a bad idea but China and Russia will never have issues because 20 Chinese infantry equal $60, literally larger than the possible total value it can have unless you’re working a rule where China can leave their territories. I think 18 infantry for USSR would be $54 which is larger than it’s own national worth unless it captures Axis territories which the excuse for that is now it has more population to use.

Hi Erocco,
these numbers are based on a formula found during Classic time by Dauvio Vann and his friends, then improved and adjusted to better fit the need of Second Edition units. Here is one link in House Rule:
http://www.axisandallies.org/forums/index.php?topic=40346.msg1684954#msg1684954

Below, you get the whole formula and a short explanation:

@Baron:

@Dauvio:

It came to my attention that one of my formulas are already out there that I discovered 30 years ago.
http://www.axisandallies.org/forums/index.php?action=profile;u=185969 has also discovered the formula P^2*N=S
And just for fun you can try these formulas also. S/P^2=N. √(S/N)=P
P=POINTS
N=NUMBER OF UNITS
S=STRENGTH OF ONE KIND OF UNITS IN A TERRITORY
This formula should replace the punch formula. It is much better then the punch formula.

Now the next formula is (P100)/(C^26)=S
P=POINTS
C=COST
S=STRENGTH OF THE UNIT BASED ON COST
With this formula you can also price units according to their strength. √((P100)/(S6))=C
This formula is for points. (S*(C^2*6))/100=P

For better results for some of these formulas, have all your units cost ten times then what they are. These are some of the VANN FORMULAS I came up 30 years ago.

If you have any questions about these formulas, please ask.

I found how you can get the main part of Vann formula or Baron-Larrymarx according to a specific unit as benchmark.

I took the Fighter A3 D4 C10 and I wanted to convert into Tank A3 D3 C6 as benchmark (Baron-Larrymarx formula).

Then I saw what I did.

Power (of attacking Fighter): A3 * C6 (cost of Tank)/C10 (cost of Fg) * 1 Hit Point C6 (cost of Tank)/C10 (cost of Fg) = 1.08
You can reduce this equation because (cost of Tank)(cost of Tank)/ (cost of Fg)*(cost of Fg) is same to
(cost of Tank) IPCs^2 / (cost of Fg) IPCs^2 and give a simple ratio.

C6^2*A3/C10^2 = 1.08
36 squared IPCs 3 Power * 1 Hit /100 squared IPCs = 1.08 PowerHit Point

This explained what is hidden in Baron-Larrymarx formula:
Offence or defence strength factor= 36*Power/Cost^2.

The whole Enigma formula is
Refence unit Cost^2Power of the actual unit1 HP/Cost of the actual unit^2

So, the Basic offence or defence strength factor result (1.08, in this case) is express in Power*Hit Point
1^2*Power (of a given unit)*1 hit/Cost (of this same given unit)^2

And this formula can be adapt according to any benchmark, for instance a 1 IPC unit:
131 hit/10^2 = 0.300

And this is a very small number. That’s why Vann formula:
Strength= (Power100)/(Cost^26)

add an arbitrary 1001/6= 16.667…
So, 16.667131 hit/10^2 = 0.5
And this would provide the Fighter strength attack factor based on an hypothetical benchmark unit of √16.667 = 4.0825 IPCs.
A 5 IPCs revised Tank in Vann formula gives a Strength : 16.66731 hit/5^2 = 2.00 powerhit

Can you elaborate on the ship calculations?

Destroyer strength: .30144/8^2  = 0.675
Cruiser    strength: .60144/12^2= 0.600
Battleship strength: .701442.618/20^2 = 0.660

These numbers means that Destroyer is the most optimized unit for combat to buy for each IPC invested, then it is battleship and finally Cruiser.
Said otherwise, Cruiser is sub-optimal for the cost.
3 DDs C8 A3 D3 (A9 D9, 3 hits) will be stronger than 2 Cruisers C12 A6 D6 (A12 D12, 2 hits) if you can use a Battlecalc to test D10-sided values.

From stronger to weaker for 120 IPCs basis:
15 DDs A3 D3 (A45 D45)
6 BBs A7 D7 (A42 D42)
10 CAs A6 D6 (A60 D60)

There were a few wars fought in South America in the early 30’s. I don’t know who had who’s backing in those conflicts. There was the Guerra del 41 between Equador and Peru. I know the US supported Peru and Japan supported Equador, but I’m pretty sure that support was from the bleachers. The only equipment I can tell you for sure that was used was the Czech LTP (Panzer 38t). These were used by Peru.
Peru had all the gear. They actually prepared for war. This lead to Peru having a 3-4 to 1 advantage in men and equipment. Except for tanks. Equador had none. Peru had around 25. Take a wild guess at who won.