Global 1940 and 1943 Expansion for use with TripleA

[SuperbattleshipYamato]

@barnee

:+1: :+1:

[barnee]

We’re going to switch to how Boxes work and explain how “Take Over of Italy” and “D-Day” work in the future.

Updated 11-20-24 at Bottom of Post

Using the Boxes will take some getting used to, but like anything, it’ll get easier the more you use them :)

In this example, we have Army Group North in Belarus, which consists of 3rd Waffen, 2nd Panzer, 6 Infantry, 2 Artillery and 2 Panzer Grenadiers. 2nd Panzer is “Active”. Meaning it gets it’s bonus shots.

There are also 2 Waffen Paras present. The minefields have already been crossed and will not play a part in the battle.

NOTE
You MUST move the Defender in Edit with “Perform Move or Other Actions” before the Attacker or the Defender will not defend correctly.

At the start of russia’s Combat Move, we move AG North to belarus.
Click on Edit Mode “Perform Move or Other Actions” . Use “Ctrl e” or click on “Game” top left.

Now we move AG North.

2nd Panzer and 3rd Waffen need to move as well.

Germany has All of it’s defending units in belarus, so now we move russia’s.

They’re going to send 1st AG and 3rd Corps from Bryansk, along with 1st Tank from moscow.

I’m not certain on this point, but I believe I asked @The-Captain previously, that the AG must have one of it’s Corps/Armies “Active” to be an AG, so we will deactivate 1st Tank in this instance.

We click on Edit again so it will deactivate the moving and replace “Tank_General3” with “Tank_General” so they won’t get the bonus.

Now we click on "Perform Move … " again and move the rest of the godless communists from there Boxes to belarus.

We’ll pause before the Battle as i don’t wanna get timed out :)

So, if you are using the “2.6” prerelease, you will notice at the bottom of screen the units in the territory that the cursor is on are listed.
Unfortunately, our Ginormous battle doesn’t show them all. I guess it depends on monitor size :)

All right. Time for battle :)

So Big battles like these require a lot of attention. Especially with the Armies and Corps. Triplea will show the AG/Corps/Armies as potential hits.

Obviously don’t select them. That may be a reason not to send them into the battle, but I like the information purpose it provides.

A matter of personal preference.

Almost forgot, gonna send 10 bullet stoppers for the commies too. It’s just a learning tool not a strategic guide :) The Captain has those here https://www.axisandallies.org/forums/topic/37458/strategy-guide-global-1940

Hmm … somewhat disappointing for russia.

So we can’t take any of the Tokens as hits, so we deselect those.

The AG is no longer functional, so we off it’s Flag and kill the Panzer General as well, so he won’t keep giving his bonus.

Note
You can add a PG/TG/ etc … if needed, after battle with edit, and switch it out for a different casualty.

Jerry isn’t gonna have to worry about that in this example lol

They still got the Badass 5 hittin Waffen Panzer though lol

Pretty solid comeback. His 4 hitters kinda sucked but those 2 boys were all over it :)

This is where it requires you to be on it. I can’t remember for sure, but I think ivan had 10 Inf in his AG.
Sadly, we can’t access History while in Battle :(

So, i dusted 10 Inf and the AG. Rather keep the Tanks I’m thinking.

NOTE
The AG is Disbanded but the Active component of it, Commisar 3, retains his bonus shots, as he still has all of his dudes.

Another solid strike by ivan and Jerry is toast. Note we have to whack the Tokens and will still need one more rd to finish him.

Not too bad, got the rest of the Inf anyway.

Need to B double E double RUN back in a bit :)

So machine froze and had to rerun battle. Jerry got his ass kicked Big time this go. So any discrepancies from the previous example are due to that :)

Non Combat Move time. 1st Tank remained intact and moves back to his Box.

1st, 2nd and 3rd Corps Reform with all Tank units and move to there Boxes.

1st AG Reforms with 1st Tank and 1st Corps, as well as 5 Inf from Bryansk and 5 from Smolensk.

1st Tank is now Active in the AG, so we want to deactivate the commiesar in 3rd Corps. We already moved units to the 3rd Corps Box, so it won’t let us.

You must change Units Before moving any of them or it won’t let you.

In this case, we just say F it, and edit the change in the next phase.

Anyway, should be helpful. Victory and I have only played one game with Boxes and we’re on rd 4 or 5 I think, so still in the testing phase :)

Hmm … looks like I need to change the Smolensk place.
No biggie, will do :)

Edit
11-20-24

So thanks to @VictoryFirst 's astuteness, we now fight large battles in edit mode.

This isn’t nearly problematic as it looks, as you generally need to change what triplea picks as casualties in a big battle anyway.

One of the cool things that we’ve discovered, is that the AG and Army/Corps tokens stay in their box. We just move the units. And playing in edit allows us to take the AG flag as an additional casualty, since triplea would give it a hitpoint otherwise.

The big thing to remember, besides being deliberate and double checking the casualties taken, just as you would in a Face to Face game :) is to kill off any bonus units first.

So once the AG is no longer active, we take it as an additional hit. When a Panzer Army or Corps will no longer be active, we need to take the PG and Commisar as hits first, so they don’t continue to give their bonus.

After the battle, you can edit them back in if needed.

Try and move as many units as you can in edit during NCM, especially if you are going to reform a AG or Army/Corps at End Turn.
It will save you some edit remove and place time.

NOTE
During Combat Move, Some Territories will be incorrectly conquered. While still in edit, just switch back to the proper owner.
This usually happens with Poland and sometimes Soviet Far East and China.

While to read this it may seem complicated, after a few games it becomes quite natural. Victory and @Panzerstahl-Helm and myself find it to play quite smoothly. :)

[The Captain]

@barnee

This seems to be more or less the same way as we do it on the game board.

All units in each Army, Army Corps and Army Group are placed at the Army Boards next to the game board.

And it needs a lot of attention, when for example two Army Groups etc. are fighting against eachother.

And - as in TripleA - we use the Combat Board to display all units during the Combat phase.

[barnee]

@The-Captain :grin:

[barnee]

@barnee that’s a lot of Panzers :)

[barnee]

This post is deleted!

[SuperbattleshipYamato]

@barnee

Seems complicated. Very nice though!

[barnee]

This Example will Explain How U-boats work.

This is now out of date as of 2-13-24. It will be updated in the near future. Latest DL explains in Game Notes.

It is Reccommended to Roll All Wolfpack Battles in Edit Mode Using the Intended Rules

Currently they work like this:

“Wolfpack” units are A0 D0 C0 units with unlimited movement. They give 1 AA shot of +1 on offense and +2 on defense to each U-Boat in it’s sea zone for 1 round only. Any hits will not be able to fire back, regardless of enemy Destroyers being present.

You may place Wolfpack units in any sea zone next to German controlled territories. Use edit if needed to place elsewhere. Place them in the First place phase so they can be used that turn. They have unlimited movement but will still be blocked by Destroyers, so use “Perform Move Or Other Actions” in edit if needed. Otherwise, you must place before starting your combat move.

Do not take as casualties. They will auto die if they are the only units left. They still need to be hit though, so if you get tired of rolling, simply submerge Wolfpack and he will auto die at End of Turn.

After combat, triplea will remove any Wolfpack units that are in the Atlantic Ocean or Mediterranean Sea that no longer meet the requirement for a Wolfpack, before the Germans non combat move. You will need to use edit to remove any additional Wolfpacks before Germany’s next combat move, if enemy attacks have done the same.

@VictoryFirst and I have determined that it is Best to use Edit and be completely rule compliant. If you don’t want to use Edit, then it will play with the above rules.

The Kriegsmarine Buys 3 U-boats and since they will all be placed in same Sea Zone, a Wolfpack as well.

U-boats in 103, 108 and 117 SZs, are going to Attack the British DD and Trprt in 106 and Form a Wolfpack.

We go to Edit Mode and add a Wolfpack to 106.

NOTE
If this were to be the Only Battle this turn, you would need to edit the Wolfpack at the Start of Combat Move or you will not be able to add it before Battle, as the Battle will start immediately during the Combat phase.

Also, you will need to have Edit on at the End of CM, so you can Fight the Battle in Edit.

If you forget, let the Battle play out and then use Dicebot and edit the results or you can redo your turn as long as you keep it the same.

If multiple Battles, then place at the Start of CM.

The Battle

Ignore the first set of Dice as they are the “AA Shot” triplea uses for Non Edit play.

So Hit OK or Space bar, since no casualties have been selected. That is the default while in Edit.

The next set of Dice are the U-boats normal First Round attack. Remember U-boats Attack at 3 for the First rd.

Select the correct amount of casualties. Also, the Trprt has to be selected last, so the DD is sunk.

The DD doesn’t go down without a Fight and sinks a U-boat.

The Wolfpack has now Disolved, so we sink it too.

We then continue the Battle or since this is a Defenseless Trprt, we can submerge and sink it with Edit at the start of NCM.

EDIT
Actually, since you are already fighting the battle in Edit, simply kill the Trprt when it’s the last unit left. So, in the above, the 1 U-boat hit and you would sink them both.

We then continue our turn and when we are ready to Place, we place all U-boats and Wolfpack in 112 SZ.

In Naval Battles that have Vessels other than just U-boats, especially Large Battles, you may want to Fight the 1st Rd with Dicebot,

https://www.axisandallies.org/forums/topic/39917/when-you-need-a-topic-to-use-the-dicebot-do-it-here?page=1

Do your Combat Move. Then do 1st rd of any Wolfpack Battles in Dicebot. Undo your CM and edit casualties. Then continue with your normal CM.

Any Units that have moved from the same originating TTy, will have to have there moves undone in order to use edit to remove units that started there as well.

If possible and not too mind blowing, try and move all units from the TTy that will be sending U-boats to the Wolfpack Attack in one CM or Moves. That way you only need to undo that move or moves, if attacking from more than one TTy, and not the ones that are attacking a different zone.

If you start the Battle in Edit, you will have to Fight All of it in Edit.

Defense

When Defending, they basically work the same way. It is Important to remember that if they have no DD present with them, any Enemy Subs that hit that are with a DD, will sink them with there First Strike Shot and they will be unable to Fire back.

Do your Combat Move. Then do 1st rd of any Wolfpack Battles in Dicebot. Undo your CM and edit casualties. Then continue with your normal CM.

Any Units that have moved from the same originating TTy, will have to have there moves undone in order to use edit to remove units that started there as well.

If you start the Battle in Edit, you will have to Fight All of it in Edit.

Anyway, that’s basically how they work. Sometimes you will need to Edit to remove Wolfpacks as well. If it’s at the End of Germany’s turn, they should auto remove, but they don’t always.

If after an Allied turn, you will need to Edit.

Remember, it’s up to you to select the correct amount of casualties while in Edit the same as if you were playing on the physical board.

U-Boat Rules page 41
https://drive.google.com/file/d/1SRDOsOwlO4Aa13cULwkWrorrXEmCmiN-/view

[barnee]

This will show an Example of “Army Groups” in Battle.

When Attacking a Territory that has an Army Group, you must move the Defenders Units From the Boxes First"

Turn on Edit and go to “Perform Move or Other Actions”.

Go to the appropriate Boxes and move the Units to the Defending TTy. In our Example, AG Center is Defending in Berlin. It consists of 1st and 2nd Panzer with 1st and 2nd Waffen as well as 2 Waffen INF who are unattached making up the required 10 Land Units.
Since the AG is Defending in Berlin, Both of it’s Armies are Active. In this case that means Both Panzer Armies.

“Panzer_General3” is what Activates the Panzer Army. Since both Panzer Armies are Active, we have 2 of them.

Now move the Attacking Units.
Note Once you are in “Perform Move or Other Actions” you can keep moving Units from different TTys without having to click on it every time the way you do with “Add Units”.

It’s Important to remember the Makeup of the AGs, so you will know when to Deactivate them in Battle. Once Battle is joined, you won’t be able to access history, so a separate window containing a screenshot or simply jot it down on paper etc … as long as you remember :)

In our example, 1st AG is comprised of 1st Tank and 1st Corps with 2nd and 3rd Corps plus 2 Guard INF for the required 10 Land Units.

2nd Tank is also attacking, but he is Inactive, thus they are being led by a “Tank General” instead of a “Tank General3”.

When using the Battle Calculator, you need to remove any non Hit Point Units for a more accurate result.
In this case that would be both AG symbols and 2nd Tank.

Also, if you were Attacking a TTy without a Defending AG, you need to edit a “Inactive” AG Flag in case it is needed as a HP to even out the Attackers Flag.
Do Not take as casualty until After the Attackers Flag has been killed. If the Attacker’s Flag survives it will auto die at end of battle.

I will pause here so the post doesn’t time out

All Right ! On to Battle !
It’s important to communicate with your opponent the correct order of loss before starting.
I think some triplea players know how to do it by round but I do not. You can’t save mid battle but you can take a screenshot. Maybe they try to be online at the same time Idk :)

At any rate, our Battle, while large, is still rather straight forward. Both players want to keep there AGs alive for as long as possible, although if the Battle gets skewed, that could change.
Hence, once again, why you want a clear line of communication with your opponent.

Ok here we go :)

Only 1 AA hit. Bummer for Jerry.

31 hits for ivan. Slightly above average. His “2s” did pretty good.

We can’t take the AG symbol as a casualty, so we dust the Engineer instead. The AG is still intact.

Jerry delivers a Massive blow to ivan as his counterattack is well above average.

They are able to keep 1st AG intact though. The Battle continues :)

Pretty close to average for the commies. Tick above maybe.

Unfortunately for the reich, AG Center is disbanded as well as 2nd Panzer. If they had taken 1 less hit, they could have killed there FTRs to keep 2nd Pnzr intact.
Both Active Armies in the AG keep there Active status as long as they are complete. It does not matter if the AG is disbanded.
It’s not to be though. Let’s see if they can get one more big lick in against the russians.

Looks about average. Same number of hits as ivan.

1st AG is disbanded but 1st Tank remains active. This should do it.

The Reich is Defeated. They put up strong resistance till the end.

We’ll break before Non Combat Move. :)

It was a close Fight. Not a lot of russians left.

Tank General 3 is Edited to Tank General. This is done first, as if we move Units in Edit from the same TTy before editing him, it doesn’t work.

1st AG and 2nd Tank move back to there Boxes.

The rest of the now defunct 1st AG move to there Boxes as well.

2 Paras move from Eastern Poland to Germany. As this is Non Combat Move and the russians have conquered Berlin, they are able to use there Air movement ability.
They aren’t allowed to on an Attack of a Capital.

The 2 Paras and one of the TGs reform 1st Corps with the surviving commiesar.

It says “Tank units” in the rulebook can be in a Corps, so I’m gonna assume that means TGs too. I will ask @The-Captain for clarification when I’m done here, just to make sure.

EDIT
The above is incorrect. Tank Generals can not be part of a Corps
I will make a Note for that in the Game Notes.

An Elite also moves in from Poland, but they are not allowed to be in a Corps.

russia finishes the rest of there moves and places there units.

I will provide additional examples in the future concerning the use of Boxes.

[barnee]

Just because it looks Cool lol

[barnee]

Combat Engineers have been updated. Had to make a new Unit.

For Combat Use “German_EngineerAttack” Russian etc…

You will need to Edit before Combat replacing it’s counterpart. It will only conduct Combat Operations of “Blitz with Tank” and A2 when paired with Artillery.
This is only needed for Attacking. The othe Engineers will defend correctly as well as the “Attack” Engineer. Use Edit to replace as needed.

[barnee]

Here is Latest Update:

Update to 1.875

Change Log UHD Boxes:

Version 1.875
12/20/23
Change “aaGun” Transport Cost to Same as “Armour”.
Made German Air Transport the only one that can Carry Tank Units.
Allow Germany to Build Total War Units in Italy.
Add “Luftwaffe” and “Fighter Aces”.
Escorts and Convoys Now Auto Change in Most Situations.

DL Instructions https://www.axisandallies.org/forums/topic/39844/global-40-expansion-boxes?page=1

DL link, always same, https://github.com/beelee1/global_40_expansion_uhd_boxes

Here’s the new Fighter Aces

[barnee]

Update to 1.876

Change Log UHD Boxes:

Version 1.876
12/21/23
Add “Fighter Aces” to the Timetable.

DL Instructions https://www.axisandallies.org/forums/topic/39844/global-40-expansion-boxes?page=1

DL link, always same, https://github.com/beelee1/global_40_expansion_uhd_boxes

[barnee]

Landmines

Landmines require a fair amount of edit. As with most things, they become easier to use, the more experience you acquire.
In games I have played, russia and Germany use them the most, so we’ll use them for the example.

In Early 1940, the Soviet Union is concerned with possible German expansion at there expense. They begin to build Landmines to counter the threat.

They purchase 7 LMs.

Once they have made it to there final destination and are ready to be “Armed”, you will need to replace them via Edit with “Changer” LMs.
Which ones will depend on which Border you want to defend.

As a guide
No color denotes West
Blue North
Red South
Yellow East
Green NW and SE
Orange SW and NE

Use the Comment Log which is located on the top left under “View” to clarify which border is being defended.

There are also LM “Boxes” which designate which color LM defends which border in high use areas for a quick reference.

So if Belarus had a Orange LM, it would defend against E POL. Blue and it would defend against Novgorod.

The Soviets have 6 unarmed LMs in E POL.

They Arm 3 No Color ( West ) against POL and 3 Orange ( SW ) against Slovakia and clarify in the Comment Log.

How They Defend

The Attacker does there CM.
Any LMs that are being crossed have to be rolled for before combat takes place.
You may use the in game dice roller under “Game” next to View or use the A&A.org dicebot.

If any LMs detonate, you will need to undo your CM or parts of it and use Edit to kill the appropriate units.
Any Units that have moved from the same originating TTy, will have to have there moves undone in order to use edit to remove units that started there as well.

If possible and not too mind blowing, try and move all units from the TTy that will be crossing the LM in one CM. That way you only need to undo that move or moves, if crossing from more than one TTy, and not multiple ones.

You will need to use Edit for placing and removing Changer LMs and any units they kill.
Unarmed mines purchased by the player will place and move correctly.

Changer LMs are Allied to all players, so will not cause a combat by themselves. Unexploded mines can stay in conquered TTys that way.

In this example, Germany has 3 unarmed LMs, as well as a Engineer unit in W GER, that will transport them after battle if the combat succeeds.

The attack is a success and the Engineer transports 3 LMs to Normandy.

Per the rules, these LMs can be armed immediately, even though Normandy was conquered that turn.

After NCM, use edit to remove and then place the Changer LMs. In this case, the Reich wants to defend against any Allied attacks coming from 110 Sea Zone. 3 Blue Changer LMs are placed, as we consider 110 to be North and documented in the Comment Log.

Landmine rules page 28
https://drive.google.com/file/d/1SRDOsOwlO4Aa13cULwkWrorrXEmCmiN-/view

IMPORTANT

For reasons unknown, sometimes after editing a LM to Changer control, that color LM will no longer show up in Changer’s edit window.

If that happens, place a different LM than desired, usually non nation specific and document in comment log.

On the next turn, remove the LM that isn’t showing up, it will then reappear as an option to place.

Will add the colored LMs to the “True Neutral” player so this won’t happen in the future.

Improved Update Coming Soon

[SuperbattleshipYamato]

@barnee

Very nice work!

[barnee]

The Soviet Fighter Ace Leads a successful sortie

[barnee]

A MAJOR improvement to how Landmines work is in the works.

Thanks to a Brilliant suggestion by @Panzerstahl-Helm you will be able to “Hover” on the LM and it will tell you which TTY it’s defending.

You will still have to fight the LM battle in edit though :)

Edit
Might be able to make Country specific LM A0 D0 with a First Strike that hits at 2 or less. That way the LM hits wouldn’t be able to fire back.

Would still have to edit to changer if overrun.

Hmm … not sure if A0 D0 units can do that though. The First Strike.

Well, will test that lol

[barnee]

Update to 1.9

Change Log UHD Boxes:

Version 1.9
1/28/24
Fix SZ 122 Border.
Change Fighter Ace Cost to 11.

DL Instructions https://www.axisandallies.org/forums/topic/39844/global-40-expansion-boxes?page=1

DL link, always same, https://github.com/beelee1/global_40_expansion_uhd_boxes

Edit
Am going to quit posting here https://www.axisandallies.org/forums/topic/39844/global-40-expansion-boxes

Not sure how we ended up with two threads, but all future updates for triplea G 40 Expansion will be here :)

[barnee]

Update to 1.91

Change Log UHD Boxes:

Version 1.91
2/13/24
Adjust German Boxes.
Add Alternate Landmines.
Remove First Strike for Paratroopers, U-boats and Type XXI U-boats. Remove A1D3 Desert Generals and Commisar.
Fix Underground Factories Not Changing Correctly.
Update Take Over of Italy Notes.
Add Kamikaze Option.
Add FlackTower Option.

DL Instructions https://www.axisandallies.org/forums/topic/36998/global-1940-and-1943-expansion-for-use-with-triplea?page=1

DL link, always same, https://github.com/beelee1/global_40_expansion_uhd_boxes

Big Thanks to ebbe at the triplea site for the FlackTower image !

[barnee]

Update to 1.92

Change Log UHD Boxes:

Version 1.92
2/14/24
Adjust FlakTower so it Does Not Count as a Placement.

DL Instructions https://www.axisandallies.org/forums/topic/36998/global-1940-and-1943-expansion-for-use-with-triplea?page=1

DL link, always same, https://github.com/beelee1/global_40_expansion_uhd_boxes