@sweetchops27 Surprised that Senussi isn’t on here as an Ottoman-Aligned Territory (land area could be in-between Cyrenaica and Egypt) . If you don’t want to add more territories, you could very well replace Cyrenaica with it and make it north and south instead of west and east.
Axis & Allies Anniversary upgraded version
-
Forgot to mention a major rule for France:
“At the start of their turn, before their respective Research and Development Phase, the German or Italian player may attempt to capture the French Fleet in Toulon (Sea Zone 13) if France is Axis controlled and these players have a military presence in France. Roll 1 die for each of the 3 french sea units present in sea zone 13: on a roll of 1, the unit is captured; any other rolls result in the destruction of the unit. Independently of the dice results, the entire remaining Vichy French units on non-occupied territories join the Allies (Free France).”
Also note that some of these National Advantages require air and naval bases…usually 1 per power mentions these facilities.
-
@Dagon81 said in Axis & Allies Anniversary upgraded version:
If you knew the struggle to find anything worth for the Italians as NAs… lol… But if you have/find anything worth as NA let me know ;)
heh heh maybe you could give them a another defense boost when Italy gets attacked. A couple German infantry or ?
Also maybe add a couple dudes if Egypt falls. But yea … : )
Nice work.
What’s your factory limit on Naval builds ? Been using
need a base for all builds in Global. Original base for CVs, BBs and CAs.Anyway, been a while since I played this version. Definitely looks worth a test drive. Was a quite popular map, so should draw some interest.
Do you have a link to all the changes ?
-
Thanks ;)
About the sea units that can be built on naval bases/factories, I’ve been doing the same: BB, CV and CA only on the original Industrial Complexes with an operational naval base; all the new ICs can only build destroyers or below (again with an operational naval base).
Didn’t include this in the rulebook, maybe its good to include as well…
@barnee said in Axis & Allies Anniversary upgraded version:
Do you have a link to all the changes ?
Yeah, in the dropbox link you’ll find the loose pages of a booklet (1-12) with all the Optional rules:
https://www.dropbox.com/sh/wli8ficivgzh28y/AADLVC127x_UTCC5F2aAcIW7a?dl=0 -
-
@Dagon81 Those are mostly what I use in my game. Each country rolls for 2 advantages out of 6 at beginning of game. I do have 6 for Italy.
- Free Battleship. Place in Rome sz.
- Black Shirts Inf D +1 in all Italian terr.
- Bravado All Inf Attack +1
- German Influence Germany can use Italy’s iIC to build 2 units and place per turn.
- No Allie ships in Med. Italy received 5 icps
6.Puppet State Germany can build 2 Italian units per turn and place at Italy’s IC.
Awesome work. Sent you a pm
-
Here’s the Charts I use. Be nice to get Tech cards too.
-
@Dagon81 HI … I agree these cards are wonderful and very beautiful. But rumor us it will be about 50 bucks to create/print them. Is there a group rate? I was also hoping you could send the link to the full set download Warmly Lawrence
-
Group buy! :wink:
-
@malstrom said in Axis & Allies Anniversary upgraded version:
@Dagon81 HI … I agree these cards are wonderful and very beautiful. But rumor us it will be about 50 bucks to create/print them. Is there a group rate? I was also hoping you could send the link to the full set download Warmly Lawrence
Hi Lawrence, thanks, glad you liked them :) Did the math, for the French units plus air and naval bases and Tac Bombers on http://www.historicalboardgaming.com/ its around $18 plus shipping costs… and $7.08 for the deck and rulebook (not including the Free French tokens) plus shipping costs on https://www.thegamecrafter.com/…
Unless you’re from outside the US…its definitely not $50…
-
Yes, sure. I have the ready to print files in .jpg on dropbox, the link is down:
https://www.dropbox.com/sh/wli8ficivgzh28y/AADLVC127x_UTCC5F2aAcIW7a?dl=0Even though the files are .jpg these are maximum quality files. Printed through these guys: https://www.thegamecrafter.com/
they did an amazing job. There’s even a “Enable Linen Texture” option and let me tell you that the cards look amazing, these guys are professional. Poker Card size deck.Also, there’s a rules booklet, you can print with these guys as well, choose Medium Booklet. I might change a few things in the Tactical bombers section, I don’t think I mention that these can bomb factories as well…
I guess the Free French tokens are optional, you don’t really need them but adds a nice touch. You’ll need 5 of these. Medium Circle Chit. The thing is, I believe they only print big quantities of these, and I had another project and printed the remaining punch outs as tokens for the other project.
As to the miniatures, http://www.historicalboardgaming.com/
You’ll need 2 sets of Factory tokens that include air bases and naval bases, about 3 - 4 Tac Bombers for each power, 2 French roundels and French units: 2 Submarines, 2 Destroyers and 1 Cruiser.All the files and suggested print shop above.
-
Night Fighters: German bombers can perform SBR missions but defending AA guns need to roll twice to obtain a hit ( two ones to score a kill).
Baltic Sea Defense: Any Allied ship that enters the Baltic or leaves the Baltic must avoid German sea mines. Each ship is rolled by the German player and a 1 result destroys the ship
-
To provide the convenience factor for the community , could you set the cards up as a product on the product page so we can just click and buy?
-
@Imperious-Leader The Axis & Allies logo would probably have to be removed to sell it publicly.
Dave Jensen, Founder of Axis & Allies .org
-
@djensen said in Axis & Allies Anniversary upgraded version:
@Imperious-Leader The Axis & Allies logo would probably have to be removed to sell it publicly.
And the source of the nice images might be “copyrighted” as well
-
@Imperious-Leader said in Axis & Allies Anniversary upgraded version:
To provide the convenience factor for the community , could you set the cards up as a product on the product page so we can just click and buy?
@Tjoek said in Axis & Allies Anniversary upgraded version:
@Imperious-Leader The Axis & Allies logo would probably have to be removed to sell it publicly.
And the source of the nice images might be “copyrighted” as well
Can’t do much about that, its a free print and play unofficial expansion…
-
You mentioned that the print shop you used likes to create a large run of prints. That makes sense for everbody. Do you think its possible to mentor a group of interested persons who would want to collaborate as a group for group rates? So what may I ask was the cost for the cards for you a single buyer?
Thx
Lawrence -
I would like to develop a set of cards for AA1914, do you think you can give up the source file?
I just like the format, i cant use the pictures anyway
-
@malstrom said in Axis & Allies Anniversary upgraded version:
You mentioned that the print shop you used likes to create a large run of prints. That makes sense for everbody. Do you think its possible to mentor a group of interested persons who would want to collaborate as a group for group rates? So what may I ask was the cost for the cards for you a single buyer?
Thx
LawrenceSome of their products they just print big quantities like the tokens Medium Circle chits as a sheet has 150 of these. For the decks, they print 18 cards per sheet so for this game, they’ll print 3 sheets. For the deck of 54 cards, costs $4.98.
You can play with just the National Advantage cards. I would say that there are about 7 cards that you won’t be able to use if you leave tac bombers, France rules and the air and naval bases as these cards are specific to these elements.
-
@Imperious-Leader said in Axis & Allies Anniversary upgraded version:
I would like to develop a set of cards for AA1914, do you think you can give up the source file?
I just like the format, i cant use the pictures anyway
Yeah sure, its this one, tif format:
https://www.dropbox.com/s/asofk0d0huairy0/Front.tif?dl=0You can remove the layers of the roundel, text and pictures.
-
The Tif extention imports as as a jpeg
can i get a pdf or ai for that card?
Illustrator cant cut off layers with jpeg
Suggested Topics
.png){kind=link}
