Global 1940 & 1943 Expansions Game Reports

@FranceNeedsMorePower

Go to https://github.com/triplea-game/triplea/releases/

Click on the latest version (the top post).

Under “Assets” there should be a set of links. Click on the one that fits your computer (if you use Mac, click on the link with the macos, Windows, the one with windows in it, etc.).

Click on the file in Downloads. It should open up a TripleA downloader similar to the one you used when you first downloaded TripleA. It should open (if there’s an error, it’s probably on your end).

It’s a vast improvement over 2.5 but is very easily navigable.

@The-Captain

Nice!

@barnee

So the Allies won in the end.

Great game report! I enjoyed reading it.

@caesar-seriona Historically Mussolini declares war when there is no doubt Paris is going to fall to Germany.In a G40 game Germany often combat moves through N.Italy and NCM air units to S.Italy,both of which require Italy to be not neutral.
So to keep Italy neutral until UKs turn Germany would need to retreat from Paris{leave it for Italy to take perhaps}and NOT enter Italian territory G1.

Hi Erocco,
these numbers are based on a formula found during Classic time by Dauvio Vann and his friends, then improved and adjusted to better fit the need of Second Edition units. Here is one link in House Rule:
http://www.axisandallies.org/forums/index.php?topic=40346.msg1684954#msg1684954

Below, you get the whole formula and a short explanation:

@Baron:

@Dauvio:

It came to my attention that one of my formulas are already out there that I discovered 30 years ago.
http://www.axisandallies.org/forums/index.php?action=profile;u=185969 has also discovered the formula P^2*N=S
And just for fun you can try these formulas also. S/P^2=N. √(S/N)=P
P=POINTS
N=NUMBER OF UNITS
S=STRENGTH OF ONE KIND OF UNITS IN A TERRITORY
This formula should replace the punch formula. It is much better then the punch formula.

Now the next formula is (P100)/(C^26)=S
P=POINTS
C=COST
S=STRENGTH OF THE UNIT BASED ON COST
With this formula you can also price units according to their strength. √((P100)/(S6))=C
This formula is for points. (S*(C^2*6))/100=P

For better results for some of these formulas, have all your units cost ten times then what they are. These are some of the VANN FORMULAS I came up 30 years ago.

If you have any questions about these formulas, please ask.

I found how you can get the main part of Vann formula or Baron-Larrymarx according to a specific unit as benchmark.

I took the Fighter A3 D4 C10 and I wanted to convert into Tank A3 D3 C6 as benchmark (Baron-Larrymarx formula).

Then I saw what I did.

Power (of attacking Fighter): A3 * C6 (cost of Tank)/C10 (cost of Fg) * 1 Hit Point C6 (cost of Tank)/C10 (cost of Fg) = 1.08
You can reduce this equation because (cost of Tank)(cost of Tank)/ (cost of Fg)*(cost of Fg) is same to
(cost of Tank) IPCs^2 / (cost of Fg) IPCs^2 and give a simple ratio.

C6^2*A3/C10^2 = 1.08
36 squared IPCs 3 Power * 1 Hit /100 squared IPCs = 1.08 PowerHit Point

This explained what is hidden in Baron-Larrymarx formula:
Offence or defence strength factor= 36*Power/Cost^2.

The whole Enigma formula is
Refence unit Cost^2Power of the actual unit1 HP/Cost of the actual unit^2

So, the Basic offence or defence strength factor result (1.08, in this case) is express in Power*Hit Point
1^2*Power (of a given unit)*1 hit/Cost (of this same given unit)^2

And this formula can be adapt according to any benchmark, for instance a 1 IPC unit:
131 hit/10^2 = 0.300

And this is a very small number. That’s why Vann formula:
Strength= (Power100)/(Cost^26)

add an arbitrary 1001/6= 16.667…
So, 16.667131 hit/10^2 = 0.5
And this would provide the Fighter strength attack factor based on an hypothetical benchmark unit of √16.667 = 4.0825 IPCs.
A 5 IPCs revised Tank in Vann formula gives a Strength : 16.66731 hit/5^2 = 2.00 powerhit

Can you elaborate on the ship calculations?

Destroyer strength: .30144/8^2  = 0.675
Cruiser    strength: .60144/12^2= 0.600
Battleship strength: .701442.618/20^2 = 0.660

These numbers means that Destroyer is the most optimized unit for combat to buy for each IPC invested, then it is battleship and finally Cruiser.
Said otherwise, Cruiser is sub-optimal for the cost.
3 DDs C8 A3 D3 (A9 D9, 3 hits) will be stronger than 2 Cruisers C12 A6 D6 (A12 D12, 2 hits) if you can use a Battlecalc to test D10-sided values.

From stronger to weaker for 120 IPCs basis:
15 DDs A3 D3 (A45 D45)
6 BBs A7 D7 (A42 D42)
10 CAs A6 D6 (A60 D60)

[Copied from my post in your other thread on this subject, located here: http://www.axisandallies.org/forums/index.php?topic=37073.0]

Depicting a single regiment would be problematic in terms of game scale.  In general terms, a game on the scale of Global 1940 represents (admittedly in very abstract terms) the actions of units that are mostly the size of army groups and fleets – and, furthermore, of army groups and fleets which have no specific identity other than their nationality.  It would be hard to justify saying that one particular regiment-sized unit, with a specific name, ought to be added to the game; by that rationale, there are hundreds of other regiments that could be added too.

The obvious exception to the above principle is the single fighter which represents the Flying Tiger squadron in China…so it’s not an ironclad rule that units smaller than army groups and fleets are never represented in the game.  It can be argued, however, that the Flying Tigers are a special case because of their high profile, and because in the game China lacks aviation forces of its own.  China doesn’t lack infantry, however, so adding a USMC unit doesn’t bring anything distinctive to China’s forces.

Additionally, Global 1940 has no rules that govern riverine operations – which is understandable, because the game map doesn’t depict any rivers.  Even the Saint Lawrence, which is huge in real life, isn’t depicted: on the map, it looks like a strip of land.  There are a few lakes depicted, plus a few canals and narrow straights, but no rivers.  So a river patrol unit in China would literally have nowhere to go.

@knp, 3D6 heavies have never been popular. Back in the early nineties we played off and on with them. It’s one of those things where if you have them, you love them if you don’t, well life is hell. I like the 2D6 and seems like most players can live with them especially on the Global scale and sheer number of units on the board.

Personally I liked it better when SBR came out of the player’s bank. People really hate that one and democracy usually rules most of the time when you have a regular group. I understand why people hated that one, however I liked it. It’s one of the things I like about disrupting convoys.

Honestly I love HBG, you can now add a lot of stuff to the game especially when it comes to tech. SPA and TDs are a must.

Anyway your thoughts on mech blitzing and both dice counting for heavies was spot on.

What does this have to do with the title?