Custom Map Choices

I have been playing around with different configurations for a custom table and wanted to note some things I’ve landed on that I really like. A main one thing is having the map mounted so that it can slide around as needed on top of a bigger playing area. My table is 65” x 95” in total with a 5.5” arm rest around the outside and the middle is a recessed neoprene surface. I have the OOB Global map mounted on 1/2” rigid foam with a 1/2” aluminum frame around it. This allows the map to slide up close to whoever’s turn it is, but then be in the middle so both players can roll dice In front of them without disturbing the map and in easy view of the other player. (Plus we like lots of room to roll the bones). This ability to adjust the surface along with a standing height, makes it comfortable for long uses because you can move around more and don’t feel as tied down.
Things I’ve learned and changed from original design - I originally used too big of a frame for the map and mounted it on too high of a foam block (you can see these pictures at the bottom) - it made it hard to see the other player’s dice and the big frame took up too much real estate. My global map is mounted on much thinner foam (the framing is bad, you can see if you look closely) but I also used much thinner aluminum angle for the frame. This gives just enough grip when needing to move the map around (I use furniture slides on the bottom, which glide very nicely on the neoprene) but doesn’t make the whole thing too bulky. Having it an inch or so off the surface keeps the dice off, but isn’t so heigh that you can’t see the other player’s dice rolls. When playing other versions (such as Zombies) the board is much smaller, but it can easily swap in and out on the same table since it can move around where ever it is needed or be pushed aside.
I originally made it normal table height, but found long reaches while sitting were harder and it just felt cramped. Standing height with a bar stool is a great way to have the best of both worlds.
The 5.5” rim around the table itself gives you a nice arm rest that doesn’t interfere with the gaming surface. I’m playing with how to best add some cushion to this part - open to suggestions. Sometimes I just lay a piece of leftover neoprene on it.
Dice bounce nice on the neoprene and stay off the floor. It also feels nice and has enough give to allow things to slide but be picked up easily. Wouldn’t definitely go with neoprene again as a surface covering.
I made the drawers open to the inside of the table so you can stay hunched over the action while accessing and stowing stuff away. 50/50 on whether I would keep this if I were to do it again. If I were doing it again, I might try to build customer drawers form scratch using actual drawer glides, but that was beyond my ability when I first did this, so I just used clear plexiglass boxes with aluminum pulls mounted on them. It’s nice having them clear, and I was happy with how the pulls came out, but without glides they can be a little fussy sliding in and out of their slots.
I originally designed the table so that I could put a cover surface back on top when not in use, but find I don’t really ever do that, so if I were to do it again, I might not mess with that part (I never even finished staining those as you can see in the pictures).
CF362D52-269F-4480-8CBB-08139099138F.jpeg A9E12EA1-66EB-4671-86AC-68C62FD30AD5.jpeg 858DE1F2-030A-4D5A-93E4-70A7D1180ADB.jpeg 8F513EE0-DA37-4BA9-880E-4D5EF7BF431F.jpeg F0188165-757B-4CC1-BF67-5045832283C9.jpeg 2E3CD627-0D31-4121-ACF8-682F9F58A40B.jpeg

@jeffcamis:

Can someone recommend a printer for a custom map make that doesnt charge 250 plus.  Im located in north jersey area.  I need a custom map for aa 50th anny edition.  I have tge file i want to use.  Thanks. Jeff.

I’m not from New Jersey, but I am in America… I got my Scrim/Outdoor Banner Vinyl AA50 map made for like $60.

Did it at FedEx Office Print & Ship Center… I would imagine you have one like that in Jersey… also maybe try a Kinko’s if you have one of them. If you can’t find one locally, try the FedEx online shop and have it sent to you.

Nice work!!

And here’s my new 1942 map

my1942custommap1.jpg
my1942custommap2.jpg

@Young:

Thanks CWO Marc, really appreciate your comments… do you play often? I understand there is a lot of players in Montreal, do you have a game group?

For many years I’ve had too much going on in my life, professionally and otherwise, to have had time to do much of anything other than collecting the A&A games.  And, to be honest, I have too many issues with many of the features of the various A&A games that I’ll probably never play anything other than what I’m hoping to create at some distant point in the future when I do have the time for it, which is a completely personalized version of the Global game that, for all intents and purposes, keeps the sculpts and the map board but throws out the entire rulebook and reconceptualizes the game from scratch.  And it’s not even fully correct to say “keeps the sculpts and the map board” either.  I’ll be expanding the number of nations and the number of unit types by making use of the very large pool of A&A sculpts I’ve acquired over the years, for instance the ones from the early-edition games and the ones from 1941 and 1914.  And as I’ve noted in the thread where I’ve posted pictures of my custom table, one of the first things I did to the Global 1940 map was to rework its “under-the-plexiglass” roundel allocations to better reflect the structure of the world as it existed prior to the invasion of Manchuria in 1931, as a starting point from which I can then modify the map (by placing roundels on top of the plexiglass) to represent any subsequent starting date from 1931 onward.  A related project that I worked on to create the infrastructure for this eventual new game was the Global 1940 map inventory, a copy of which I posted over here last September:

http://www.axisandallies.org/forums/index.php?topic=36590.0

But at this point I don’t have an actual plan for what this reconceptualization will look like.  Nor am I likely to do so until I have the time to work on this project solidly for months at a time…so this may have to wait until retirement (which isn’t for tomorrow by a long shot) before this idea translates into anything concrete.

@cyanight:

Everyone has their own unique way of painting the pieces.  No matter how we paint the pieces they must still be playable within the game.

And the nice difference between game sculpts and real military equipment is that sculpts are rarely lost or damaged in combat.  If that wasn’t the case, people might actually hesitate to risk sending their painted sculpts into battle on the game map, given the large amount of time they’ve spent on customizing them.  :-)

I have them formatted to avery .75 round labels. see house rules ( pieces and where to get them)

@BluGerman:

today i managed to read through this year long forum thread and I have to ask what happened after November 17th 2011?.. did everybody in this forum mysteriously dissapear? or was it just discontinued? or was it moved to another forum thread or something?.. somebody please let me know because I was really excited to see Allworks whole board with his miniatures (they are awesome!)

In answer to your question- I don’t really know.  :? Allworkandnoclay is an artist who does all sorts of other work for money, not just Axis and Allies. I presume that he moved on to other work, as his Flickr account shows him doing some sculpting and what not. To be honest though, he stopped posting pics, people stopped commenting, and it sort of fell of the face of the earth. There’s some stuff on TallPaul’s page, and there are plenty of other artists with some awesome stuff if you need your daily fix of painted minis!