@vodot Thanks!
Global Gaming Table
-
we need more pictures of this. please post more details.
-
Very awesome.
-
Looks fantastic. What’s the symbol between Germany and China though?
-
Seems a basketball ball … maybe Harlem Globetrotters as hidden playing power? Amazing, Larry! :lol:
-
What’s the symbol between Germany and China though?][/[/quote]
its the Union Jack (difficult to burn into wood). we wanted an additional roundel to make it look more balanced. thats why the canadian roundel was used. the french and italian are the same thing
another pic
this one you can see the back of the dice tower (when finished, it will actually fold into the table). suede was used for the interior and bottom of the tower. on the same side of the table you’ll see the smaller pockets for chip holders (suede was also used for the bottom) 5 pockets on each side of the table that match the boxes that came with the FMG Ammo Box, (plus the china box and additional U.S. box). 3 pockets on the opposite end that fit the 3 misc. boxes that came with FMG Ammo Box.
-
suede was used because its more durable then felt you find at a fabric shop. their felt tends to ball up. gaming felt (like used on a casino table) is expensive. suede is soft, looks good, cheap, and durable. the table actually has no legs (guess it wouldnt be hard to do though). it was made to sit on top of another table i own. the project started because AAP40 wouldnt fit on my poker table (where we usually play). so we needed a bigger table. then we kept having more ideas for the table, but actually decided to keep it simple because it looks better with less. i’m going to stain the table (dont know with what yet). my friend is going to burn something into the dice tower facing the table (i’m hoping for an Uncle Sam Poster). i kind of mentioned it earlier, but the dice tower is removable and when layed on its side, fits into the table (in case its preferred not to be used, the space can be used for something else)
-
Excellent looking table so far, now I am inspired to try something similiar. Looking forward to seeing the completed table in action.
-
Is this going to be a one of a kind?
-
I have a few suggestions:
Add lamination on the sides, top and insert and make the dice rolling area something that all players can inspect to make sure nobody cheats. Below are some patterns and prices for 4x8 foot is about $145. You will need one.
http://www.cabinetparts.com/c/laminates-for-countertops/?gclid=CK7T4oyQmaECFRkcawod7UFBag
The logos can be decals printed on your computer. These can be applied on the sides or insert as you have done.
If you make such a nifty item, you gotta put legs on it, and make them folding so the table can be stowed away when not in use.
Felt is another option than lamination. You could even buy the cheap official poker table for like $60 on ebay and dress it out for AA.
Here is DIY:
Here is a nice one and cheap… you can add drawers underneath that hold the official FMG boxes for pieces.
http://cgi.ebay.com/NEW-BLACK-FITTED-96-TEXAS-HOLDEM-POKER-TABLE-COVER-/350344192250?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item51922420fa -
Add lamination on the sides, top and insert
i do like that idea but a little pricey. i’ve already invested about $80 bucks, plus i bought some plexiglass to put on top of the gameboard to save on wear & tear and cover the creases.
If you make such a nifty item, you gotta put legs on it, and make them folding so the table can be stowed away when not in use
the table is so big and heavy, i’m not going to be able to store to easily. i have a poker room in my basement, i’ll just lean it against the wall on poker night.
You could even buy the cheap official poker table for like $60 on ebay and dress it out for AA.
i think most poker table are perfect for AA50 (mine was), but i think AAG40 is too big for most poker tables. i have a 10 seat poker table and it still wasnt enough room
-
I don’t own a dining room table.
However when I purchased AA40 Pacific and pre-ordered AA40 Europe, I did purchase a slightly used solid mahogany wargaming table with a dark cherry finish that seats 10, and now I’m picking up and refurbishing victorian style antique upholstered chairs to match.
So I guess at Thanksgiving this year I’ll have to break out the fold out card tables and stools again :evil:
-
How large is the board area?
What’s the symbol between Germany and China though?][/[/quote]
its the Union Jack (difficult to burn into wood). we wanted an additional roundel to make it look more balanced. thats why the canadian roundel was used. the french and italian are the same thing
another pic
this one you can see the back of the dice tower (when finished, it will actually fold into the table). suede was used for the interior and bottom of the tower. on the same side of the table you’ll see the smaller pockets for chip holders (suede was also used for the bottom) 5 pockets on each side of the table that match the boxes that came with the FMG Ammo Box, (plus the china box and additional U.S. box). 3 pockets on the opposite end that fit the 3 misc. boxes that came with FMG Ammo Box.
-
Seems like the playing area is too deep. I would want to play on a level surface with the bins and dice tower flush with the playing area. Otherwise pretty sweet though. :-)
-
Seems like the playing area is too deep. I would want to play on a level surface with the bins and dice tower flush with the playing area. Otherwise pretty sweet though. :-)
Well, with the playing area inset and the dice towers turned sideways, you can put another sheet of plywood on top and play poker or cover it with a table cloth and still use the table without having to tear down the game. Very practical if you ask me. 8-)
Or you can put a sheet of plexiglass on top and it’ll be a fun A&A themed shadowbox table, which might be a little less practical, but much more fun for displaying how you’re crushing your opponent. :wink:
-
How large is the board area?
the size of the AAP40 & AAE40 combined with just a little give so I can get the boards in and out
Seems like the playing area is too deep
I thought that would be in issue, but I can see the whole board sitting in my chair without having to stand up. It looks deeper than what it actually is. plus one of the points to the whole project was to be able to keep the seperate boards togethor witout clipping them, taping, etc.
-
I thought that would be in issue, but I can see the whole board sitting in my chair without having to stand up. It looks deeper than what it actually is. plus one of the points to the whole project was to be able to keep the seperate boards togethor witout clipping them, taping, etc.
Also you could cover it with plexiglass in the middle of a stopped game leaving all the pieces in place while using the table for another function.
-
@Brain:
I thought that would be in issue, but I can see the whole board sitting in my chair without having to stand up. It looks deeper than what it actually is. plus one of the points to the whole project was to be able to keep the seperate boards togethor witout clipping them, taping, etc.
Also you could cover it with plexiglass in the middle of a stopped game leaving all the pieces in place while using the table for another function.
Jinx. :-P
-
Also you could cover it with plexiglass in the middle of a stopped game leaving all the pieces in place while using the table for another function.
actually, the plexiglass will be directly on the board. I hate creases when i’m playing. plus it will keep the gameboard from shifting. the plexiglass is about $60 for the size i got. you could just get another 5x8 piece of wood and cover it also, that would be cheaper
$$how much??$$
the whole thing cost me about $150 so far with the plexiglass.
-
$$how much??$$
the whole thing cost me about $150 so far with the plexiglass.
If you made a couple more and sold them you could recover your costs.
-
Nice me and my one buddy plan on building a table for global in woodshop next school year. We are currently thinking of taking a standard table plan and modifing it to fit what we want. I like the recessed board area. I will have to show him that because with a huge hardwood table(our building material in woodshop) it will be a little heavy. It would be nice to be able to use it as a dinning room table too. Nice table, again.