What Extra Sculpts, Roundels, etc for custom G40 table and game

@Lompestein Awesome work! Big thanks for including the .xcf’s and brushes as well, that should help others get a leg-up on their own projects.

@Azimuth yeah, I understand the challenge, I’m a graphic designer and I was playing around with a circular map design when I stumbled upon yours. I still might finish my design as I was incorporating some map changes I found interesting. But so far I think I’ll need some blow up boxes or something to make it work at a reasonable size.

@LebaneseWarlord said in Need advice for custom dice DIY:

I’ve recently bought 96 dice because I wanted to make custom hit/miss dice for Global 40. I bought these dice from amazon and they’re plain blank and white dice.

I don’t have a lot of experience with DIY projects but I have access to a lot of good tools so I’m looking for advice regarding techniques on how to mark and repaint the dice I bought.

For the marking, I was thinking about using a rotary tool to carve a little dot.

The real challenge is the painting. I looked a lot on internet and I can’t seem to find a technique for painting on plastic that everyone agrees on, but here’s what I have so far.

Wash the dice to remove any grease that could be on the surface Use very fine sandpaper or some sort of abrasive to remove the protective finish that is on the dice right now and offer a better surface for the new paint to stick Wash the dice again the remove the dust from the paint removal Apply one or a few (I’m not sure about this one, I’ll read what is suggested on the can) of primer Apply a few thin layer of the color I want on the dice Paint a white dot in the carving I made earlier with a fine brush Apply one or a few (not sure about this one either, something will be suggested on the can) of clear finish to protect the paint

Any correction or suggestion would be very welcome!

Guys use RIT dye for color. Go to Siredblood’s custom dice you tube video. Shows how he used a jig to spot hole dice and then dye them

Check out my video mini-series on my customizations / “how to” on YouTube here:

https://www.youtube.com/watch?v=VhtS9kBOK7s&t=2s (part 1)
https://www.youtube.com/watch?v=qBTC_725LFA (part 2)
https://www.youtube.com/watch?v=_ETQCW_mgh0 (part 3)

please like comment subscribe and/or share!

(still photos are at the end of video 3)

Part 4: Starting the ships, adding decals to the tanks, skin tones on the soldiers

Today spent some time adding paint to the sprayed ships, including painting the water jettisons on the subs black (this was very tricky and ended up looking a little sloppy). Advice for painting the jettisons: toothpicks are not small enough! If you do use toothpicks, you’ll have to dab a dot of black for each tiny jettison.

The battleships were a bit easier, and painting the decks, bridge, and smoke stacks were all done in silver. I plan on adding the final grey coat last after the deck and stacks/bridge dry. I experimented with how to add the national emblem, and will probably opt for a white background with a red dot on the bow of the ship. In the future I may do that with the rear end of the ship.

I painted the tranny smoke stacks silver and added a white background for the emblem on the destroyers. All in all, the Japanese navy is coming along nicely.

The armor is pretty much done. I added a white flag to the front side of the armor and will be adding the red dots later. For the aircraft, I’ll be adding a red band around the rear part of the plane. I was debating between sky blue and red and may alternate just for some variety.

The soldiers got some skin! And I just want to say that adding the paint alone brings out the contours of their facial features in an excellent manner on their own. I may add a touch of black to certain areas of the face but that will be a last step. The next step will be panting their uniforms, rifles, and helmets.

After all this is done, I will be spray painting the japanese bombers white, the aircraft carrier black, and then will add the details to those. The Japanese are about 55% done all in all and I’m pleased with the results so far even if they do look a bit amateurish. Stay tuned.

IMG_6405.JPG IMG_6404.JPG IMG_6403.JPG IMG_6402.JPG

@Young:

Those look awesome wolf, I would be very interested in getting some of those.

I know you’re in Canada, so not sure how/what your limits are to shopping or ordering online, but here’s a link to the organizers from Home Depot online… if nothing else, you get “the official” name.

I use these for the nation trays
https://www.homedepot.com/p/Husky-7-in-6-Compartment-Small-Parts-Organizer-83039N13/204536852

I use this for the accessories
https://www.homedepot.com/p/Husky-6-in-6-Compartment-Storage-Bin-Small-Parts-Organizer-Clear-and-Black-THD2015-03/301959981

Of course, use them as you will…

As for my flags, I just used Vistaprint and made some small rectangular product labels and you upload your pictures into them… perfect for national bin flags… I made sure to use era-appropriate flags (like the 48-Star American Flag)

https://www.vistaprint.com/marketing-materials/labels-stickers/rectangular-product-labels?couponAutoload=1&GP=04%2F08%2F2018+19%3A55%3A49&GPS=4958753423&GNF=1

YG,

@Young:

Would love to hear from those who have used the file to print their own copy of my custom map… do you have one?
––I would have to say,…NOT YET ! But once I get my latest project going, which will include a large area for a
“GRAND SIZE” War Simulations Room I’ll certainly get in contact with ya’ll.
––I must say, on behalf of all of the other gamers that you’ve already helped with your wonderful map;
THANK YOU !

Tall Paul

Thanks.

@John:

@kcheu:

yes, i know.�  I used to paint small pewter figures for a different game (it’s a D&D nerd here) and because I enjoyed painting them so it might definitely be up next.

I’ve played D&D as well. We are all nerds here, LOL! :-D

Speak for yourself… I’m a geek (which are a lot cooler than nerds).