I’ve started work on some low cost customization for Europe 1940 2nd edition (and will include pacific 1940 2nd edition when I get it). I was able to get some player aids from https://www.axisandallies.org/forums/topic/21752/game-aids-a-a-1940-global-2nd-edition. I’m also going to implement a resource system into the game, that will introduce resource costs for units (such as steel to buy tanks). Also, there will be an upkeep cost for units, eg: Each tank you have mobilized will cost a certain amount of oil per turn. This is to make the game more realistic, and to discourage unit spamming. I also plan to add more units to the game. That’s all for now
Custom carriers from OOB's and painted pieces
-
Five US Navy ships by FOlewnik- The USS Allen M Sumner (DD-692), the USS Pittsburgh (CA-72), USS Washington (BB-56), USS Massachusetts (BB-59), and my personal favorite of this particular post, the Essex class USS Yorktown (CV-10) from start to finish. To start, GHQ’s Sumner class destroyer as the Sumner itself, DD-692. GHQ pieces are made of pewter or similar alloy and are richly detailed. They’re five times the cost of an HBG piece, but they have a great variety of destroyers, too, so I guess you’re paying for variety and detail. They get painted quickly because they don’t need mods. FOlewnik bought several different DD types for the US Navy this past holiday season when orders over $100 got a fat discount, so the US Navy will have the hottest looking destroyer group when they’re all done. So here is the USS Allen M Sumner (DD-692):
The USS Pittsburgh (CA-72) is a Historical Board Gaming Baltimore class heavy cruiser. These pieces have a lot of detail but need a lot of prep work with trimming flash plastic from where the molds leave a seam. These get modded with scout planes & recovery cranes and after FOlewnik gets done with them, look really good. This was done from a scale model guide, shown here.
The USS Washington (BB-56) is the 2nd of the set from Ebard at Shapeways (there were 2 of this class). It also has the scout plane from GHQ added, and FOlewnik has added the life rafts during painting. It is painted as it looked during the Battle of Savo Island on the night of 14-15 November 1942.
HBG’s South Dakota Battleship is the basis for FOlewnik’s USS Massachusetts (BB-59). It required quite a bit of flash plastic trimming before the recovery crane was added. The scout planes from GHQ are painted separately and then glued in place before the tiny US star is added to the wings. Done to look like the ship appeared in July of 1942.
HBG’s Essex class carrier is the basis for FOlewnik’s USS Yorktown (CV-10). The bare sculpt had to be cleaned and prepped- you can see the brown putty added to level the deck. Magnets are glued in flush with the flight deck. In the second picture, you can see FOlewnik’s 10/0 brush used on the flight deck to the left, and at right is his paint palette with the paint wells.
-
@DMcLaren test
-
The artist appears!
-
@Mr-Kell Lol. I finally got a laptop that can run windows so I could reset my password. I would like to thank everyone for their interest and comments,and can now respond to any questions anyone might have.Truly a great community.
-
While FOlewnik is finishing some US Navy carriers, I’m working to get appropriate aircraft for them. We’ve got Grumman F4F Wildcats made from HBG’s slightly smaller than the out-of-box Hellcats (as seen previously), the OOB Hellcats themselves, and HBG F4U Corsairs that will eventually make up the US Navy air arm. We’ve also got a few P-40’s and a lot of P-38’s. We’ll be using the P-38’s for the US long range aircraft. About 6-7 years ago when we decided to add decals to aircraft to separate the long range AC from regular, I painted up (poorly- before good brushes and equipment) some Hellcats. It was quickly apparent that the OOB sculpt lacking a propeller hub that all the other aircraft in the game had, and the converted F4F’s from HBG had, made it look just plain wrong. I could have painted a dot for a propeller hub but the profile would still be wrong. I wasn’t happy with the way they looked, as seen in this picture taken after I’d re-done the cockpit canopies on the tacticals and inked the cockpits on the Hellcats in late 2015:
Two-tone tactical #33 is seen above before it was further modded with home made decals as shown earlier in the post. I knew I would repaint these Hellcats at some point because I wanted their noses to more resemble the grinning face they are known for, as seen here in this picture taken from navsource.org:
This had been in the back on my mind for a few years, and last Autumn after I’d bought some new clothes I saved the plastic strings that held the tags on after I’d cut them off thinking they could be of use. I felt it would be better to drill a hole to accept the propeller hub, so I used a drill bit that was just a bit larger than the plastic strings just in case I was off center I might have some wiggle room (turned out to be a good idea):
I use an old artist’s gummy eraser to hold the piece still while I drilled the hole to accept the plastic string (also to hold aircraft by the wing while fuselage decals are applied). The idea is that if the hole is straight, the string gets glued in straight and is therefore straight when the string is cut to make the prop hub stick out straight.
On the old painted Hellcats, I sanded the face so the glue would hold better, and I was repainting anyway. This also made it easier to set my starter hole with a tiny drill bit to ensure I was in the proper high off-center, leaving room for the lower air intake to be painted in, before changing to the larger bit to make the hole for the string.
The string is cut off after the glue dries, leaving what will become the propeller hub. The entire face of the four Hellcats above were repainted (along with some minor touch-ups elsewhere) as the first test pieces with prop hubs and smiling air intakes:
Now the OOB Grumman F6F Hellcats can be on the same game board as the Grumman F4F Wildcats and not look like they’re going to fall out of the sky and crash. They’re even sized right compared to each other:
Before adding magnets, it’s a good idea to place the piece on a smooth, flat surface and spin it by flicking a wing on the very edge with your finger and watching carefully to see where the center of weight is on the spinning piece. You’ll want to drill the hole for your 1/16" x 1/32" magnet on the bottom of the aircraft at this exact spot, or as close as you can possibly get. This makes it sit better on any flight stand, and is properly balanced for climbs, dives, and banks on a rounded flight stand:
When the rest of the Hellcats are completed, they’ll get their control surfaces & cowls inked to better match the Wildcats. -
From “Hellcat Aces of WW2” from Osprey publishing: “One of the most famous markings ever worn on a US combat aircraft, the ferocious cat’s mouth applied by VF-27 to it’s F6F-3’s and -5’s was conceived by Lts Carl Brown (10.5 kills front row fifth from left in the below picture) and Dick Stambrook (10 kills, standing fourth from right), and Ens Bob Burnell (four kills, to Stambrook’s right) whilst the unit was working up at NAS Kahului, Hawaii in March/April, 1944. Burnell hand-painted ‘teeth’ on all 24 F6F’s prior to embarking aboard USS Princeton on 29 May, 1944.”
If you do an internet search for Hellcats, Lt. Robert M. Burnell’s Hellcat, named ‘Paper Doll’, comes up quite often in images, such as this one:
He may not have been the squadron’s top scoring ace, but he put in the time to put the eyes & teeth on all 24 aircraft before they embarked. So of course I had to do ‘Paper Doll’ and whomever would have flown wing for Burnell. It was quite a challenge but I’m very happy with the end result.
-
Casablanca class light carriers USS White Plains (CVE 66) painted in Camouflage Measure 33, Design 10A and USS Wake Island (CVE 65) painted in Camouflage Measure 32, Design 4A by FOlewnik. I think Wake Island started out to be the USS Tripoli (CVE 64), as Tripoli wore MS32/4A but Wake was in the same camo as White Plains. Either way, I think he did a great job. USS White Plains first:
USS Wake Island:
-
USS Intrepid (CV-11) by FOlewnik. This sculpt by HBG required a lot of cleaning and trimming of flash plastic as well as a little putty to look as clean and smooth as she does. You really can’t beat the price, though, for these good looking Essex class carriers. Not getting any compensation for saying that, just expressing my opinion. The USS Intrepid is wearing Measure 3, Design 3A, per this drawing taken from https://www.wikiwand.com/en/World_War_II_US_Navy_dazzle_camouflage_measures_31,_32_and_33:_aircraft_carriers:
-
USS Lexington (CV-2) wearing a bow wave camo by FOlwenik. 3D print from Ebard at Shapeways. I think I mentioned this before, but when you work with 3D prints, they are both very porous and very fragile. To strengthen the piece, I like to add a little bit of liquid super glue (not the gel) to anything that sticks up, like the conning tower and smokestack. The liquid is immediately absorbed into the porous print, just don’t put too much on in one spot or you could lose detail. FOlewnik also filled the bottom with putty for both strength and weight. I have to admit that this is one of my favorites because of the work he put into the hull, which is nice and flat, making a good canvas. Comparison pictures taken from navsource.org.
-
USS Enterprise (CV-6) in her very own camouflage, Measure 33, Design 4Ab, circa 1944, painted by FOlewnik on Ebard’s late war Yorktown class print from Shapeways. Ebard has an early war and a late war Yorktown class print set of 2 and there were 3 of the class made so FOlewnik got one set of each. Compare this print with the above Yorktown (CV-5) and Hornet (CV-8) early war prints and you’ll see more AA gun mounts on the late war print. Pattern sheet taken from wikiwand.com and photos of Enterprise circa 1944 taken from navsource.org and cropped and sized for comparison.
The latest group of US carriers parked at the Norfolk Naval Yard:
-
USS Wasp (CV-7), post re-fit, from an out of box (OOB) sculpt, modded and painted by FOlewnik. The OOB sculpt is supposed to be the USS Wasp (CV-7) as launched, which I neglected to take a picture of for comparison so grabbed the picture from HBG’s site. You’ll see it’s missing lots of AA guns forward of the island, along the starboard side. The sculpt is also solid plastic, which seems to sink in the center when the plastic cools after it’s made and not only leave a small gully, but it pulls the island to a port side list. We’d been playing A&A since 1985 and with the Wasp sculpt since it came out in 1999 and never noticed the leaning island. The deck had to be filled with putty and sanded before magnets could be added, a crane was added, and 46 anti-aircraft gun mounts, both 20mm and 40mm, were added. The hull was cut away fore and aft and supports added.
-
USS Indiana (BB-58) wearing Measure 32, Design 11D from the South Dakota Class Battleship sculpt by HBG, painted by FOlewnik. The float plane launch catapults are molded into the sculpt, so FOlewnik added the recovery crane made from wire and the GHQ scout planes. The actual ship had two different paint schemes in her first year of duty before she settled on Measure 32, Design 11D. http://www.navsource.org/archives/01/58a.htm has some really large photos of it getting its first coat of paint on 8 September 1942 at Hampton Roads, Virginia that are fantastic for their detail, but that unique camouflage didn’t look like it belonged with the previously chosen measures done on the pieces completed earlier.
All those carriers above and the recent aircraft additions need a plane guard destroyer so here is one of GHQ’s Sumner class destroyers done as the USS Charles S. Sperry (DD-697): -
USS Pensacola (CA 24), first of her class, from an out of the box sculpt. This is FOlewnik’s last modified cruiser for the US so he took a few shots with his cell phone while he was doing it that I asked him to send to me so I could edit and post them along with the shots of the finished USS Pensacola. The actual ship herself changed a bit during the course of her life as shown in the difference between these two profiles, taken from shipcamouflage.com on the top and navsource.org on the bottom:
And this photograph of the other side, lined with sailors in their dress whites:
Here is the progression from plain green game sculpt to finished ship:
-
A pair of Douglas SBD Dauntless aircraft in two different sets of insignia, both from the Summer of 1942, Enterprise Air Group. “GC” on the earlier of the two aircraft is “Group Commander”, in this case either Commander Howard L. Young, Lieutenant Commander C. Wade McClusky, or Lieutenant Commander Maxwell F. Leslie. The first one, “GC”, is from the time they spent on the Enterprise (CV-6) during the Coral Sea campaign, and the second, “B10”, represents the rest of the air group as they appeared during the Battle of Midway. I relied heavily on photos in the book “The Big E - The Story of the USS Enterprise, Illustrated Edition” by Edward P. Stafford for decal placement and types.
I used the home made decals printed on white background for the first decal layer on the bottom, but the tops of each aircraft are different in that the GC aircraft is mostly decal and B10 is mostly hand inked. You can tell when you see the pictures enlarged as the hand inked aircraft has cleaner lines. The home made decals were printed on my 300 DPI printer, so they could look better if they were printed on a 600 DPI or better printer but they’ll do real well for an A&A game piece.
The control surfaces on GC are all decal, but B10 is only decal on the dive flaps on top, the rest of the top control surfaces are hand inked. The cockpits are hand inked as well. The nose guns and upper engine cowl were hand drawn with waterproof ink on clear decal paper because I didn’t want to wait for a decal from the non water-proof print to dry, clear-coat it and wait for that to dry before I could use it. Here you can see the large hand drawn decal on the nose of the aircraft before lots of Micro Sol id applied. Only that section is decal- the rest of the cowl lines & exhaust is hand inked. You cal also see the dive flap and other control surface decals on the first coat of paint. The “step” area on the wing is painted:
The difficult part of using home made decal is the application. You’ve essentially spray painted the top of a decal and cut it from its sheet, immersed it in water to separate it, and applied it to the plastic as soon as it would slide from the paper. The problem is that only then does the decal itself start to absorb the water, making it expand, while the painted top does not. So your home made decal will “peel” up around the edges. I learned the hard way that it’s best to apply liberal amounts of Micro Sol at this phase to help get rid of the curl and help the decal to stick to the aircraft. It didn’t matter if it was applied to clean plastic or a primed piece- lots of Micro Sol was needed. The Micro Sol also helps get rid of “silvering” on the clear parts of the decal. Of course, using the white background, I didn’t have to worry about that, but the decals on top are clear, so I had to use extra care to make sure they didn’t silver. It didn’t matter- some did anyway. As you can see from the picture, I cut sections of the bottom decal from the sheet rather than the entire thing at once. This made it much easier to apply.
On the picture above, you can see some silvering beneath the clear decal on the dive flaps of each aircraft. If you don’t print with waterproof ink, you can’t poke a pin hole in the decal and add Micro Sol to get rid of the silvering or you run the ink beneath the protective spray, ruining your decal after its been applied. Another thing I learned the hard way. Fortunately, they make 20/0 brushes so those mishaps can be easily cleaned up. I have to say it was easier to match upper and lower control surface lines when inking by hand, since all I had to do was line up my point on top with the decal on the bottom and match them at the edge. Getting the decal to do that was much more difficult, so the rest are getting hand done with only dive flap and engine cowl gun decals on top with the full white decal on the bottom and no stripes on the tail or red dots in the middle of the stars. They may look good, but they are a pain in the rear end!
-
Amazing work!
-
Wow! And here I thought I put a lot of detail in my ships. Can’t wait to see these on the Enterprize. Great job Doug.
-
@DMcLaren
Good stuff. The perfect tools for sinking those pretty flat tops.
I’m beginning to understand how this up close photography accents mistakes never seen on the board.
As to the silvering, I noticed on the pic of the nose decal that the paint surface looks dull, one thing I’ve learned about decals is they prefer to lay down on a shiny smooth surface. The irregular surface is trapping air pockets under the film.
I’m personally using Pledge gloss floor finish. Dries fairly quick, levels well without killing surface detail. -
@Mr-Kell - Thank you! I’ve heard of using Pledge on larger scale models but never thought it might work on something smaller. Thanks for the tip- I’m doing that on the next one. And a hearty “Indeed!” on the close up photography. I started photographing FOlewnik’s ships with a better camera and it gave me a little more confidence to push my comfort level. Makes me look forward to doing more Stukas, too.
And thank you to everyone else as well. I have to pass those along to a lot of guys that came before me and gave me the inspiration to try new things to see if they work.
-
I was able to catch up with FOlewnik this past week and get pictures of the latest finished ships of the US Navy- three light carriers and six destroyers. Let’s start with two light carriers of the Independence Class that started as cruiser hulls but were completed as aircraft carriers and reclassified as a “Small Aircraft Carrier” and designated as “CVL”, 15 July 1943, the USS Independence (CVL-22) and the USS Belleau Wood (CVL-24). I have to say I really like these Shapeways prints by Ebard for their detail, and I think FOlewnik does a fine job adding a bit more with pigment.
Next up is the USS Bismarck Sea (CVE-95), from a Casablanca class carrier sculpt from Historical Board Gaming:
Now on to the destroyers from GHQ. I’ve mentioned before that they’re pewter so they’re costlier than plastic pieces, but the detail in them is just great. Here are two Somers class ships, FOlewnik painting them as the USS Warrington (DD-383) wearing Measure 2, and the USS Somers (DD-381) herself in Measure 12:
Below at left is the Sumner class USS Cooper (DD-695) wearing camouflage Measure 32, Design 3d, and on the right is the Fletcher class USS Foote (DD-511) wearing Measure 32/18D:
The last two destroyers for this post are Benham class USS Sterett (DD-407) wearing camouflage Measure 12, and Bagley class USS Bagley (DD-386) painted in Measure 32, Design 1d:
Overhead shot of the group:
-
Wow ! Those look Great ! Glad they’re protecting Washington from those u-boats : )