Painted playing pieces

Some painting I did on my original pieces.
Japanese Navy.JPG Italian Navy.jpg Bismark.jpg

@cavestone I also use vallejo paints. The key question here is are you brush painting, or using an airbrush, or both?

The Vallejo paints have a “Model Air” line that comes pre-thinned. You can buy a thinning product (from them) to add to the “Model Color” series paints, which are the exact same thing, just more concentrated and thicker.

If you’ve never used an airbrush, its a bit finicky–it requires regular cleaning and a without a good brush and compressor the paint will flow very inconsistently. The process will be very frustrating unless you use the pre-thinned paints because the brush can only blow paint that is within a certain set of thickness parameters that are difficult to achieve, especially if you are trying to mix the air in the brush’s reserve or in small quantities. That’s why having copies of both Model Air and Model Color is fine by me–unlike Warhammer 40K I’m using primarily earthy colors, greens, dunkelgelb and dunkelgrau… other AFV and camoflage colors and so i don’t need a collection of primary or bright colors.

But I recommend it. The airbrush creates a sublime, beautiful layer and slight mix variations can be used to create shadows, grades, etc. Then you go back over with your brush, adding highlights, lines, details. Then, back over again with a drybrushing…then back to the airbrush to blast Flory Wash all over it.

Can’t see your photos, you can’t post photos until you have a certain post count. I wouldn’t use water to thin paints, they are water soluble but the mix and viscosity is all wrong (though water is obv. cheap and easy to clean up)

As for oil-based paints, these require thinner to clean up, they are much more difficult to drybrush with and are not used for airbrushing. The days of the old testors paints is long behind us–even apple barrel paints are easier to work with and cheaper. The early painting methods were much more about glomming thick layers of paint onto lead miniatures and the modern approach with water based paint and a series of different techniques creates much better results.

I have seen lots of people here use acrylics and I have on occasion. Most of my paints are enamels though. I find that is stays wet longer (which is a good thing) and doesn’t clump up nearly as much on your brush. I also use enamels in my airbrush. I find that enamels are actually much easier to clean than acrylics. While acrylics are water soluble, they don’t just dissolve, especially if already dry. It involves a great deal of scrubbing and scraping. With enamels, all you need is some mineral spirits cleaner and it takes the paint right off with very little effort. Cleaning acrylic paint out of my airbrush was hell the first time I did it… never using acrylics in there again. In terms of the finish, I can only assume that enamels hold up better to bumps and scrapes than acrylic paint does.

Someone once asked if enamels, by default, have a glossy finish to them. They do not, as long as you are using flat enamels, which seem to be the standard. I use flats and they have an excellent, non-shiny finish. I feel like enamel colors are a little deeper too, on the whole, but I suppose it depends on the brand of acrylic you use. Vallejo seems to be a popular choice for acrylics. I use predominantly Model Masters (Testors) enamels. In general, I would just said to find a brand you like to work with and produces the results you like. Don’t buy super cheap paint… you will get the results you pay for.

Good luck!

Excellent job. I also love the subs.

@Darkshadow:

Thanks guys, I have copies of Europe and pacific 2nd ed and recently bought some of HBG’s fantastic sculpts but was wondering what to do with my 41 pieces, I guess for the most part simplest thing would be to spray them for the correct nation (though I doubt Russia will ever need 6 carriers).

Oh… I do believe I understand now. And yes, your best option is probably to spray them to match the correct nation (as best you can anyway). If you do not want the ones you cannot use, you could list them in the Marketplace section of the forum and see if anyone wants to buy or trade for them.

I’m remembering the days when Table Tactics was the top of the line expansion for Axis and Allies. When '14 was announced i went crazy trying to find the WW1 pieces. I’m still looking.

@Albert:

@Spitfire38:

I have looked at I-94’s decals and thought about it… the only ones I have trouble with are the Russian stars. I enjoy hand painting the insignia and I feel like it makes it look more uniform when it’s all paint, but like you said, it would definitely save some time  :lol:

Well you could save some effort there as Moscow ordered upper wing stars to be painted out on the eve of the German invasion……plain green was also changed to green with a black disruptive camo pattern   http://mig3.sovietwarplanes.com/index.html

I didn’t know that they painted over the top-wing stars. Thanks for sharing! If I were to paint them again, I’d probably leave them on or use decals, just for easy recognition on the game board, but I like knowing what was historically accurate.

what was the outcome of this?
was the pieces returned?

since its christmas please tell me this had a happy outcome  :-)

(just curious, I haven’t bought anything from mclovin)