I have been playing around with different configurations for a custom table and wanted to note some things I’ve landed on that I really like. A main one thing is having the map mounted so that it can slide around as needed on top of a bigger playing area. My table is 65” x 95” in total with a 5.5” arm rest around the outside and the middle is a recessed neoprene surface. I have the OOB Global map mounted on 1/2” rigid foam with a 1/2” aluminum frame around it. This allows the map to slide up close to whoever’s turn it is, but then be in the middle so both players can roll dice In front of them without disturbing the map and in easy view of the other player. (Plus we like lots of room to roll the bones). This ability to adjust the surface along with a standing height, makes it comfortable for long uses because you can move around more and don’t feel as tied down.
Things I’ve learned and changed from original design - I originally used too big of a frame for the map and mounted it on too high of a foam block (you can see these pictures at the bottom) - it made it hard to see the other player’s dice and the big frame took up too much real estate. My global map is mounted on much thinner foam (the framing is bad, you can see if you look closely) but I also used much thinner aluminum angle for the frame. This gives just enough grip when needing to move the map around (I use furniture slides on the bottom, which glide very nicely on the neoprene) but doesn’t make the whole thing too bulky. Having it an inch or so off the surface keeps the dice off, but isn’t so heigh that you can’t see the other player’s dice rolls. When playing other versions (such as Zombies) the board is much smaller, but it can easily swap in and out on the same table since it can move around where ever it is needed or be pushed aside.
I originally made it normal table height, but found long reaches while sitting were harder and it just felt cramped. Standing height with a bar stool is a great way to have the best of both worlds.
The 5.5” rim around the table itself gives you a nice arm rest that doesn’t interfere with the gaming surface. I’m playing with how to best add some cushion to this part - open to suggestions. Sometimes I just lay a piece of leftover neoprene on it.
Dice bounce nice on the neoprene and stay off the floor. It also feels nice and has enough give to allow things to slide but be picked up easily. Wouldn’t definitely go with neoprene again as a surface covering.
I made the drawers open to the inside of the table so you can stay hunched over the action while accessing and stowing stuff away. 50/50 on whether I would keep this if I were to do it again. If I were doing it again, I might try to build customer drawers form scratch using actual drawer glides, but that was beyond my ability when I first did this, so I just used clear plexiglass boxes with aluminum pulls mounted on them. It’s nice having them clear, and I was happy with how the pulls came out, but without glides they can be a little fussy sliding in and out of their slots.
I originally designed the table so that I could put a cover surface back on top when not in use, but find I don’t really ever do that, so if I were to do it again, I might not mess with that part (I never even finished staining those as you can see in the pictures).
CF362D52-269F-4480-8CBB-08139099138F.jpeg A9E12EA1-66EB-4671-86AC-68C62FD30AD5.jpeg 858DE1F2-030A-4D5A-93E4-70A7D1180ADB.jpeg 8F513EE0-DA37-4BA9-880E-4D5EF7BF431F.jpeg F0188165-757B-4CC1-BF67-5045832283C9.jpeg 2E3CD627-0D31-4121-ACF8-682F9F58A40B.jpeg
Painted playing pieces
-
Hi all
I thought i would post some pics of the playing peices so far i have painted. I have painted them with the view to look good from over foot away. for each base colour i tryto add at least one subtle highlight colour to it. It maybe hard for the eye to see higlights if subtle but the brain sees it and recagnises it as more natural. for the ships a brown wash not only brings out all the detail on the ship but the staining of the deck helps give it scale.
Useing a very fine brush with a water downed brown or grey paint is good for adding detail which isnt on the model. Just make sure the paint is bareley left on the brush so a faint line apears on the model.
The american bombers are not painted with silver paint which i find on such a small scale looks wrong so i used a series of gradients of grey from medium working down to white for reflections. They look messy up close but it works from a distance of 12" or more
I am not going to stick too religously to real detail if its too confuseing to players identify thats why the americans ships are all grey and the brits are the same camo.
The infantry miniatures for the game are nice enough but they need a good coat of paint to adhere to the plastic which takes away all the detail so i am going to replace them with 15mm miniatures.
British
American
Japanese
Germany
-
wow these are great!!! i especially like the German desert camo and the black machine gun scorches on the American dive bombers.
-
Nice work!
-
They have a nice ‘rustic’ look to them! Add some bullet holes and that’d be pretty badass. Nice work man!
-
Lovin’ those Japanese carriers and German armor pieces!
-
Thanks all for the kind words. The armour desert colours are modelmaster valejjo yellow ochre with yellow ochre/buff mix for highlights.
the planes are buff base with buff with a tiny bit of white added for highlights.for the gun smoke staines i just use a very fine and very very dry brush with practicly any paint left on it and sweep the brush at the wing and away until it applies enough paint.
i like the variety of japanese carrier designs i just wish i could keep my hands straight for lines and symbols
-
Impressive.
-
I cant see them… are they gone?
-
now it worked…. good work!
Nice!I´m doing mine as well, as we speak :)
-
now it worked…. good work!
Nice!I´m doing mine as well, as we speak :)
cheers
i like to see other peoples paint work styles and preferences.
There is alot to paint though some countries can be put on low priority like russian ships,you dont see too many of them being built in a game. -
I have some new as well:
-
japfleet
-
japfleet2
-
japplane
-
japtank
-
UScars
-
us soldier
-
ahhhhhh…. decals!
-
-
some good painting there. some straight lines unlike mine on the carriers.
may i suggest trying washes on your battle ships NOT the aircraft carriers though. the batle ships have lots of nooks and detail for a dark grey or brown wash to pull out the detail.