OK, I have some new information that might help pinpoint the problem.
I just downloaded Func’s latest version and repasted it to the F40.gim folder. All the files were over-written.
I had changed a few territories and seazones the other day to the correct names. After re-pasting Func’s files, those territories still have the names I gave them. So when I had save the new names to sektorinfo.sek, they were not affected by the re-write of files. There is no sektorinfo.sek file in my ABattlemap folder, there is only the new one in the F40.gim folder. So how in the world did my changed names remain through the new over-write??
OK, I have some new information that might help pinpoint the problem.
I just downloaded Func’s latest version and repasted it to the F40.gim folder. All the files were over-written.
I had changed a few territories and seazones the other day to the correct names. After re-pasting Func’s files, those territories still have the names I gave them. So when I had save the new names to sektorinfo.sek, they were not affected by the re-write of files. There is no sektorinfo.sek file in my ABattlemap folder, there is only the new one in the F40.gim folder. So how in the world did my changed names remain through the new over-write??
Yes, that happened to me too. For example, I correctly renamed the Canadian territories, and they remained the same. I, in the beta version, made notes about the adjacency of Z118 and 109, which also remained.
OK, I have some new information that might help pinpoint the problem.
I just downloaded Func’s latest version and repasted it to the F40.gim folder. All the files were over-written.
I had changed a few territories and seazones the other day to the correct names. After re-pasting Func’s files, those territories still have the names I gave them. So when I had save the new names to sektorinfo.sek, they were not affected by the re-write of files. There is no sektorinfo.sek file in my ABattlemap folder, there is only the new one in the F40.gim folder. So how in the world did my changed names remain through the new over-write??
Yes, that happened to me too. For example, I correctly renamed the Canadian territories, and they remained the same. I, in the beta version, made notes about the adjacency of Z118 and 109, which also remained.
Very odd. Let’s hope when Func wakes up in Spain that this is the clue he needs to fix.
i have never messed around with name changes.
i have downloaded funcs latest release and have not had the problems gamer and calvin say they have.
Allweneed, I’m using these technical difficulties as an excuse not to post, so you know. I’m not playing any Global or Europe until this is fixed.
No matter what I do or in which PC I install the module, always works, so I cannot fight the problem. However, all people, stay calmed
Let’s do this: here is a new link
http://www.mediafire.com/download.php?ae86o7l558hb8ho
This link includes a testing file. It’s yet the latest version (1.01), but it comes in a G40.gim folder instead of the old F40.gim folder. I also made a new start.aam file from scratch, but it’s not the setup, it has only a few national markers here and there to check if the module works. Check the names of the territories and any thing that could be wrong. I don’t want redo all the setup to find that still doesn’t work for all. If it works, all I must do is make the setup (and maybe even including the alpha setup as well)
The zip file is called ‘global_test’, and you should pick ‘Axis & Allies: Global 1940 (test)’ when start the game.
The installation: I think that here is where all the problems are. This is what you should do if you have problems with former versions:
Lately, this is the structure that folders should have. Let’s assume that you instaled AABattlemap directly in C:\ (hard disk or whatever name can have)
C:\AABattlemap\G40.gim\sektorinfo.sek -> if you have this, this should be right
By the way, old savegames should NOT be compatible with this module
Mine is working fine.
On mine Italian Somaliland is called “Liberia”.
Then you didn’t downloaded the latest 1.01 version. You still have 1.00 version
It works now
Buf… finally! :lol: OK, if works for all, I’ll include a OOB setup and an alternative alpha setup as well
So what? It’s working for all? I need a positive reply from all the person that noticed failure with 1.01, so I can include the setup in this last fix
You’ve done the hard part in putting this together, I sincerely thank you a million times over for that.
I noticed that the British fleet off Malaya causes a convoy raid against Japan for a value of 2. This is wrong in two ways, Britain and Japan are not yet at war in turn 1, and the value of Siam is only 1, so the convoy raid value should only be 1.
Working for me
You’ve done the hard part in putting this together, I sincerely thank you a million times over for that.
I noticed that the British fleet off Malaya causes a convoy raid against Japan for a value of 2. This is wrong in two ways, Britain and Japan are not yet at war in turn 1, and the value of Siam is only 1, so the convoy raid value should only be 1.
The ‘at war marker’ should be deleted then. As I’m not sure of what version are you using, wait until I fix the latest one (it only needs do the setup)
So what? It’s working for all? I need a positive reply from all the person that noticed failure with 1.01, so I can include the setup in this last fix
I’ll be downloading the fixed one and verifying that it works, tonight. I’ll let you know.
You’ve done the hard part in putting this together, I sincerely thank you a million times over for that.
I noticed that the British fleet off Malaya causes a convoy raid against Japan for a value of 2. This is wrong in two ways, Britain and Japan are not yet at war in turn 1, and the value of Siam is only 1, so the convoy raid value should only be 1.
It’s also wrong in a third way: there is just 1 warship in Z37, so it can only do 1 ipc of damage anyway.
I am eagerly awaiting a problem free module. There is no pressure; take your time. :-D
Since tested fix was reported to solve the problems, I included the setup. Note that this one comes in a G40.gim folder. Old savegames should not work
To start a game, pick ‘Axis & Allies: Global 1940 v1.02’
Finally, no alpha setup. It’s just OOB, because Larry reported that mayor changes are coming (with non-agression treaty … yaaaay! Joy and pleasure! :mrgreen: ). When all the new changes are official, I’ll update
New link to download. I trust that this time all is solved, but yet you should notice me any error :wink:
Funcioneta,
I do not see the convoy damage show up in infoview. I downloaded the new file 1.02, but I do not see anything change when enemy vessels are in the sz.
You have to download AABattlemap version 0.80a
It’s a small fix included with P40 module in flamesofeurope.de
Download the module (you need login): it includes a P40.gim folder and a small .exe file -> ignore P40.gim folder (unless that you want to install P40 module) and just copy-paste the .exe file to your AABattlemap folder (it will delete your old 0.79 exe file, so make a backup just in case)
I downloaded .8 some time back. I will have to double check to see since I have more than one version on here.
