AAG40 FAQ

@fighter:

Can English planes land in French IndoChina without having taken it by land forces prior to their landing?

yes, assuming it is stll french, is a friendly territory of a power already at war.  To add, the UK does not take control of french territories with a land unit similar to the dutch islands.  capturing and controlling french territories is the same as every other territory - in order for the uk to control fic they must first capture it from an axis power, and if so captured it will revert to french control if paris is at any time liberated.

@bblitz:

1. Can a nation land air units on a territory that was captured on the previous turn by a friendly nation (…)

Yes.

@bblitz:

2.  (…) can the controlling French player attack the sub (…)

No. Nations from same side band to defend, but not to attack. The French fighter alone can’t detect German’s sub. On the other hand, if the German Sub attacks during next German turn, then french fighter can scramble (giving the airbase is active) and defend as the UK’s destroyer will detect. French and UK band to defend together.

@bblitz:

3.  can the attacking player decide to take the first hits on his carrier instead of the fighters knowing that the fighters will not be able to land following the combat due to the status of damaged or destroyed carrier?

Yes. See it as 3 different steps. For each plane, you have to plan a legal landing during combat move, you are allowed to presume all combats will be flawless for the attacker. Then combats are resolved, not binded to any landing declaration, you can take hits (even sink) carriers. During non combat phase, any planes without legal landing will crash. This is usally done to hold on better dice for remaing rounds of battles.

A couple questions:

#1) Can a mechanized infantry capture a territory and move back to a friendly territory

#2) Scenario: Japan is attacked and Japan’s seazone has only subs, so combat is not required.  Japan scrambles a fighter to cause combat in the seazone.

Question:  Are the subs now involved in the sea battle?

@Tyzoq:

A couple questions:

#1) Can a mechanized infantry capture a territory and move back to a friendly territory
#2) Scenario: Japan is attacked and Japan’s seazone has only subs, so combat is not required.  Japan scrambles a fighter to cause combat in the seazone.
Question:  Are the subs now involved in the sea battle?

1. That’s the blitz hability. A MInf cannot do it alone, but MInf can be paired with an Armor performing this action (they must start and end together)

2. It’s Japan’s choice. Before rolling dices, Japan player state if Subs submerge or not. If attacking player doesn’t have a destroyer, then hits from attacking planes cannot be assigned to subs, must be assigned against Japan’s figther (in your example).

Question:

Nation takes control of a friendly neutral on NonCom movement phase.  Can that same power land aircraft in that territory on that NonCom movement phase?

@DutchmanD:

Question:

Nation takes control of a friendly neutral on NonCom movement phase.  Can that same power land aircraft in that territory on that NonCom movement phase?

No.
1.  Only a land unit can take control of a friendly neutral during the noncom movement phase.
2.  Air units can NEVER remain in a territory that was not controlled by you or a friendly power at the beginning of your turn.  Pro Ally or Pro Axis neutrals are not friendly powers; they are neutral.

Can you place Minor IC’s on territories with no IPC value? I’d like a seperate answer for Alpha 2+ if different from Alpha 3, since my group still plays 2+ frequently.

This must have been answered before, sorry for the repeat questions, but can I load and unload transports during the combat movement phase, in a sea zone with only an enemy submarine in it?

@Young:

This must have been answered before, sorry for the repeat questions, but can I load and unload transports during the combat movement phase, in a sea zone with only an enemy submarine in it?

Da Komrad.  The Red Oktober will not effect Deutshland’s move.

@Cmdr:

@Young:

This must have been answered before, sorry for the repeat questions, but can I load and unload transports during the combat movement phase, in a sea zone with only an enemy submarine in it?

Da Komrad.  The Red Oktober will not effect Deutshland’s move.

But only if you have surface warships as well.  If you only have transports, then the sub blocks all unloading in that seazone during the combat move (amphibious assaults).  You can instead choose to load and unload during the Non-combat phase, and the sub will have no effect.

Probly been answered times before…

Do submerged submarines can disrupt convoys?

Let’s say Japan has a Battleship, Cruiser and aircraft carrier in SZ5 and I just send a submarine there and submerge it, will it be able to disrupt convoy?

And let’s say the answer is yes, if I, as Japan decide to build a destroyer in the zone to counter that, what happen? It gives the option to the American to engage battle or retreat one case away as soon as the destroyer is build or the convoy happen and it’s at the American’s turn to decide what he do.

@MightyPol:

Probly been answered times before…

Do submerged submarines can disrupt convoys?

Let’s say Japan has a Battleship, Cruiser and aircraft carrier in SZ5 and I just send a submarine there and submerge it, will it be able to disrupt convoy?

And let’s say the answer is yes, if I, as Japan decide to build a destroyer in the zone to counter that, what happen? It gives the option to the American to engage battle or retreat one case away as soon as the destroyer is build or the convoy happen and it’s at the American’s turn to decide what he do.

Yes, they still convoy raid.

@Cmdr:

@MightyPol:

Do submerged submarines can disrupt convoys?

Yes, they still convoy raid.

Submerging is only a term for submarine’s special ability to withdraw from combat rather than roll, before other shots are fired.

At the end of combat all submarines are no longer considered “submerged”.

So yes, that sub will disrupt convoys, but it is NOT considered submerged.

On their second turn, Germany sends in 2 strategic bombers to bomb London’s IC with one escort fighter, and 1 tactical bomber to bomb the air base with 2 escort fighters, Britain has 3 fighters to scramble. Germany’s plan is to bomb the air base first, so it becomes unoperational in order to allow the strategic bomb run on the IC, without facing scrambled interceptors. Is this possible if I split my bombing campaigns into 2 separate operations? Would the UK be required (if they choose) to intercept the Tac bomber and escort knowing that their air base could get bombed disallowing them to scramble during the second bomb run? In the combat sequence it says 1. SBR 2. Amphibious Assaults 3. General combat, is it up to the attacker on which SBR is conducted first if their are 2 in the same combat phase?

@Young:

On their second turn, Germany sends in 2 strategic bombers to bomb London’s IC with one escort fighter, and 1 tactical bomber to bomb the air base with 2 escort fighters, Britain has 3 fighters to scramble. Germany’s plan is to bomb the air base first, so it becomes unoperational in order to allow the strategic bomb run on the IC, without facing scrambled interceptors. Is this possible if I split my bombing campaigns into 2 separate operations? Would the UK be required (if they choose) to intercept the Tac bomber and escort knowing that their air base could get bombed disallowing them to scramble during the second bomb run? In the combat sequence it says 1. SBR 2. Amphibious Assaults 3. General combat, is it up to the attacker on which SBR is conducted first if their are 2 in the same combat phase?

1.  Intercepters aren’t “scrambled”.  The defender can send up interceptors in a territory with any facility to defend against an SBR, with or without an airbase.

2.  Though strategic bombing runs are rolled before other combats, scrambled fighters are placed in the territories they will defend at the end of the combat move phase.  It is impossible to premptively stop a scramble with an SBR to pave the way for a scramble-less naval battle on the same turn.

@kcdzim:

@Young:

On their second turn, Germany sends in 2 strategic bombers to bomb London’s IC with one escort fighter, and 1 tactical bomber to bomb the air base with 2 escort fighters, Britain has 3 fighters to scramble. Germany’s plan is to bomb the air base first, so it becomes unoperational in order to allow the strategic bomb run on the IC, without facing scrambled interceptors. Is this possible if I split my bombing campaigns into 2 separate operations? Would the UK be required (if they choose) to intercept the Tac bomber and escort knowing that their air base could get bombed disallowing them to scramble during the second bomb run? In the combat sequence it says 1. SBR 2. Amphibious Assaults 3. General combat, is it up to the attacker on which SBR is conducted first if their are 2 in the same combat phase?

1.  Intercepters aren’t “scrambled”.  The defender can send up interceptors in a territory with any facility to defend against an SBR, with or without an airbase.

2.  Though strategic bombing runs are rolled before other combats, scrambled fighters are placed in the territories they will defend at the end of the combat move phase.  It is impossible to premptively stop a scramble with an SBR to pave the way for a scramble-less naval battle on the same turn.

Thanks, you answered my next question with that as well.

@kcdzim:

@Young:

On their second turn, Germany sends in 2 strategic bombers to bomb London’s IC with one escort fighter, and 1 tactical bomber to bomb the air base with 2 escort fighters, Britain has 3 fighters to scramble. Germany’s plan is to bomb the air base first, so it becomes unoperational in order to allow the strategic bomb run on the IC, without facing scrambled interceptors. Is this possible if I split my bombing campaigns into 2 separate operations? Would the UK be required (if they choose) to intercept the Tac bomber and escort knowing that their air base could get bombed disallowing them to scramble during the second bomb run? In the combat sequence it says 1. SBR 2. Amphibious Assaults 3. General combat, is it up to the attacker on which SBR is conducted first if their are 2 in the same combat phase?

1.  Intercepters aren’t “scrambled”.  The defender can send up interceptors in a territory with any facility to defend against an SBR, with or without an airbase.

2.  Though strategic bombing runs are rolled before other combats, scrambled fighters are placed in the territories they will defend at the end of the combat move phase.  It is impossible to premptively stop a scramble with an SBR to pave the way for a scramble-less naval battle on the same turn.

Also, I was under the impression you don’t split bombing/escorting forces until after interception.  So in the above example the Germans are attacking with 2 SBR and 1 TAC, escorted by 3 FTR.  Only after the battle with the 3 defending fighters, does Germnay declare which unit is bombing what.

@moralecheck:

@kcdzim:

@Young:

On their second turn, Germany sends in 2 strategic bombers to bomb London’s IC with one escort fighter, and 1 tactical bomber to bomb the air base with 2 escort fighters, Britain has 3 fighters to scramble. Germany’s plan is to bomb the air base first, so it becomes unoperational in order to allow the strategic bomb run on the IC, without facing scrambled interceptors. Is this possible if I split my bombing campaigns into 2 separate operations? Would the UK be required (if they choose) to intercept the Tac bomber and escort knowing that their air base could get bombed disallowing them to scramble during the second bomb run? In the combat sequence it says 1. SBR 2. Amphibious Assaults 3. General combat, is it up to the attacker on which SBR is conducted first if their are 2 in the same combat phase?

1.  Intercepters aren’t “scrambled”.  The defender can send up interceptors in a territory with any facility to defend against an SBR, with or without an airbase.

2.  Though strategic bombing runs are rolled before other combats, scrambled fighters are placed in the territories they will defend at the end of the combat move phase.  It is impossible to premptively stop a scramble with an SBR to pave the way for a scramble-less naval battle on the same turn.

Also, I was under the impression you don’t split bombing/escorting forces until after interception.  So in the above example the Germans are attacking with 2 SBR and 1 TAC, escorted by 3 FTR.  Only after the battle with the 3 defending fighters, does Germnay declare which unit is bombing what.

No, you have to declare what you are bombing when you send the bombers - to justify why they are there primarily.  However, you can take any unit you want as a loss if they scramble interceptors (hence why you bring the tacticals.)

@Cmdr:

No, you have to declare what you are bombing when you send the bombers - to justify why they are there primarily.  However, you can take any unit you want as a loss if they scramble interceptors (hence why you bring the tacticals.)

Based on my reading of the most recent rules, you’re incorrect.  You’re not required to declare what your target is until the split.  Since you cannot send either type of bomber unless it has a valid target, it’s unnecessary to justify what target it would go to:  If a defending territory only has a major factory, then tacs wouldn’t be allowed to go no matter what.  If the defending territory has a naval base and an airbase, any tacs sent will obviously only be targeting those.  And since the game seems to be designed so that there are a few chances for tactical misdirection, I doubt it’s written such that you need to show all your cards from the start.

From HGD Alpha thread:
1. Air Battle.

2. Bombing Run
Bombers are assigned to targets.
Strategic bombers can be assigned to any target (IC’s, naval bases. airbase).
Tactical bombers can be assigned only to naval bases and airbases.

3. Bombs Away

4. Damage Report

There is no mention of preemptive declaration, and since choosing targets is specifically mentioned as step 2, it would be redundant to have it prior to step 1.