Axis and Allies Civil War Game

November Update: Pictured below are some of the new designs and things in the shop, including four new colors and four new units:

Colors:

China Lime Green UK Light Tan/Beige Dutch Bright Orange French Blue

Units:

LCVP “Higgins” boats M3 Stuart Light Tanks GMC “Jimmy” CCKW 2 1/2 Ton trucks Kriegsmarine Type IX U-boats

IMG_7373.JPG

These and most of my other prints are $0.60 per model or less! Come check them out, and let me know if you have more ideas below.

As always, A&A forum members can use coupon code AADOTORG21 for 10% off your order for the rest of 2021: www.etsy.com/shop/NathanDetr0itDesigns?coupon=AADOTORG21

@fieldcommander The only issue with the larger map 5x10 are the reach ranges. So if leave some space around the edges for pieces and such you might have a hard time reaching the middle of the board, like the all important Mediterranean, especially if you have short arms like me!

FOR CLASSIC THIRD EDITION RULES
A&A Classic 3rd Edition v3.5.pdf

CLASSIC THIRD EDITION RULES.jpg

IF you can do better, you are free. I use paint. Here is the PC original
axis_allies_PC.jpg

I’ve made a deckbuilding game with a friend that’s set during the American Civil War where you play cards from your deck to move different types of army units around the map, but it’s pretty specific to the Civil War – I don’t think it would port well to WW2.

You might try Quartermaster General; it’s a bit lighter than A&A, but it’s a game about making very efficient use of each card in a relatively small deck to win World War 2 by moving armies around a map.

I can’t understand German, but I know what your doing, and that is cool, and will make it easier to keep track of. :-)

Super job on this spreadsheet.

Cheers!

John

Christmas bump.

'tis the season : ) worth a listen : )

It does fit, u place the two pices on top of eachother (they are only 40 mm high, the man board is 50 mm outside = 42 mm inside). The space is 600x800x84 when folded, the two pices on top of eachother are 500x600x80. That leaves a 300x600x80 space and my plan there is to make box of wood or paper to store units, dices etc!  :-D

@sgtwiltan:

It’s really too bad you didn’t make the side piece so that it would fit into the inner portion of the main board where the map is.
You could even make a simple cover to keep the pieces inside from falling out all over the place. It’s a great idea you have there though.

@CWO:

@ozimek1:

You could have painted at the borders, IPC values, territory names etc. on the glass. That way you could easily use the 3D map for different games by changing the glass overlay :)

I think that having different sheets of painted glass for different games would be an expensive proposition.  I don’t know how much Rorschach’s setup cost him, but the acrylic sheet which covers my own AA50 table set me back over a hundred bucks.

Yeah, I originally was going to etch all the borders onto the acrylic, but when you’re looking at $50 (give or take) per sheet for this size it would be far too expensive.  But, to be honest, the sheet is so close to the table anyway there is absolutely no mistaking the territories, so it’s all good.

And this way, if we want to play a different game, we just pop in a flat MDF panel underneath instead of the AA50 board and you’re good to go!

The entire table (not counting countless hours of time) cost me about $150 … still no legs on it though.

And, Jeremy and I finally finished our game.  17 rounds, 9 weeks (about an hour and a quarter, hour and a half a week) … Allied Victory when the Brits waltzed into a sparsely defended Berlin.