You can try contacting this guy: AAdudeCPHDK1981
Note that his copy is neither sealed or new.
@IWillNeverGrowUp said in 3D Printed Axis and Allies Board Game Pieces Available:
@GEN-MANSTEIN said in 3D Printed Axis and Allies Board Game Pieces Available:
You got a pic of the KV1’s ?
http://iwillnevergrowup.com/shop/index.php?route=product/product&path=62_93_94_100&product_id=417
Just realized I said KV1 when I was talking about the SU85 barrels being fixed! Oops.
Just placed an order thanks.
Can we get some German flak Towers?
@IWillNeverGrowUp How did you ship models go?
@Call77 said in 3D Printed Axis and Allies Board Game Pieces Available:
@IWillNeverGrowUp How did you ship models go?
Still working on them. I have a couple that are decent but not great.
@Call77 said in 3D Printed Axis and Allies Board Game Pieces Available:
@IWillNeverGrowUp How did you ship models go?
First test print of some Imperial Japanese Navy pieces. Bit of work to do on them still but it’s getting there;
PS: Also added Tiger I’s to the shop yesterday.
@IWillNeverGrowUp they look good nothing a blade wouldn’t clean up
Waiting on the world war 1 ships and land units
Guess you could always buy yourself a 3D printer.
New generic location pieces added;
@Imperious-Leader said in 3D Printed Axis and Allies Board Game Pieces Available:
Waiting on the world war 1 ships and land units
Having some issues at the moment but I’m working on them.
I’m curious about how the models take to hobby files, pin vice and drill, and mechanical drill bits. Also be nice to see some painted models along with mention of how the models were painted.
The last because if you’re doing brushes, sometimes brushwork fills in details of the model with paint, especially if you’re going for multiple coats. So if you’re painting on wee complex flags that could be tricky.
@aardvarkpepper said in 3D Printed Axis and Allies Board Game Pieces Available:
I’m curious about how the models take to hobby files, pin vice and drill, and mechanical drill bits. Also be nice to see some painted models along with mention of how the models were painted.
The last because if you’re doing brushes, sometimes brushwork fills in details of the model with paint, especially if you’re going for multiple coats. So if you’re painting on wee complex flags that could be tricky.
I’ve used files and drill bits on other 3D printed models I’ve done without issues, but not these (though they are in the same plastic material so it would work just as well). I have not (yet) painted any of the 3d printed AAA models myself (just my 32mm scale D&D models).
Multiple coats of paint on models this size are doable, but you absolutely need to ensure you’ve thinned your paints properly (water doesn’t cut it in my opinion … you need a ‘medium’ (I use liquitex matte medium myself) to maintain the pigment count). I’ve rarely had issues with fine details being filled in by painting on these kinds of pieces.
Painting fine details is tough, but doable if you’ve got the patience, steady hand, good eyes/magnification and a fine enough brush.
Hopefully someone has painted some and can put up a pic for us!
Japanese Naval units added;
@IWillNeverGrowUp said in 3D Printed Axis and Allies Board Game Pieces Available:
Japanese Naval units added;
- Kaga Class CV
- Ise Class BB
- Akatsuki Class DD
- Myoko Class Heavy Cruiser
- No.13 Sub Chaser
- Type C3 I-52 Class Submarine
Could we get a slightly scaled up version of the carrier? Like 10-15%.
Need a sculpt for Super/Heavy (3 plane) Carrier.
How about a sculpt to use for RADAR AAA?
@Grintch said in 3D Printed Axis and Allies Board Game Pieces Available:
Could we get a slightly scaled up version of the carrier? Like 10-15%.
Need a sculpt for Super/Heavy (3 plane) Carrier.How about a sculpt to use for RADAR AAA?
Upscaled versions of any of our existing models I can certainly do.
Radar AAA, I can attempt, but don’t hold your breath (any new model takes a significant bit of time to create and test before we can print it).
@IWillNeverGrowUp said in 3D Printed Axis and Allies Board Game Pieces Available:
Upscaled versions of any of our existing models I can certainly do.
Radar AAA, I can attempt, but don’t hold your breath (any new model takes a significant bit of time to create and test before we can print it).
Sounds good. I’ll give you a chance to fill out your naval series. As I would prefer different Allied vs Axis sculpts for the Heavy carrier.
For the RADAR AAA, maybe something like the M51 Skysweeper? https://en.wikipedia.org/wiki/M51_Skysweeper
When you have time.
Loads of US and UK Naval added to the lineup with German and French Naval on their way!
Looking through our stock and the ever growing list of pieces on offer, I’ve started remastering, resizing and updating everything this week.
A whole lot of new models are being added, including super heavy tanks (FCM-1, TOG2, A36 Tortoise, KV5) and more naval pieces.
We have added the Print on Demand 12mm, 15mm and 28mm sizes for those who play AAA Minis and games like Flames of War (15mm) or Bolt Action (28mm).
I think I’ll start a new thread and let this one fade once we’ve got our updates finalized.
More great 3D Printed accessories (for both A&A and other board games) in the works every week!
A few updates!
We’ve also found a much better material for the US Olive pieces. Stronger and more flexible with slightly better detail!