Simple solution for long Global 1940 games

Have nations buy units at the end of their turn.

Ships are still repaired at the beginning of the turn, though.

As part of the Axis & Allies Global 1940 & 1943 House Rules Expansion, Naval Mines are being play testet during the 2023 Autumn & Winter Axis & Allies gaming season.

Final results will be posted here.

Feel free to play test on your own. Rules are attached below.

Captain

1. G40 Naval Mines.pdf

Hi @nishav

I use Factory Limited from the Redesign Thread. I find them to work well.

“FactoryLimited” Air and Naval Bases now cost 12. All captured and newly constructed Minor Factories may only produce Artillery, AAguns, Armor, Mech Infantry, Mobile Infantry, Marines, Elite and Infantry. If a NB is present you may also build Subs, Transports, Escort Carriers and Destroyers. If an AB is present you may also build Fighters and Tac Bombers.

ABs are required to build Fighters, Tac Bombers, Bombers and Air Transports. Bombers and Air Transports may only be built in Factories on originally owned Territories that also have an AB. In addition, Bombers and Air Transports may not be built in the following territories: Kwangtung, Egypt, Norway, Alaska, West India and Korea. May not build at an AB with 3 or more damage.

NBs are required to build all Naval Units. BBs, CVs and CAs may only be built in Territories with originally owned starting Factories. These Territories must also have a NB (Need not be original NB). May not build at a NB with 3 or more damage.

So similar to what you’ve suggested. Basically the Big Guns can only be built in original major factories.

From what I’m reading yes you can move those pieces on your actual turn again.
As midnight said US can make non combat moves to plan.
China have a bit of hope. Lol
Calcutta saved ?
This will give each country some extra planning and moves to think about during turns which was stated to keep players more focused per each countries turn.
Lots of things to check out

Why don’t you post the rules here for all other people to see and if they want ? Be easier.

@Caesar:

I’d rather do the dog fight rule, it makes a lot more sense.

Yes that’s what I meant by combat.

Hi Erocco,
these numbers are based on a formula found during Classic time by Dauvio Vann and his friends, then improved and adjusted to better fit the need of Second Edition units. Here is one link in House Rule:
http://www.axisandallies.org/forums/index.php?topic=40346.msg1684954#msg1684954

Below, you get the whole formula and a short explanation:

@Baron:

@Dauvio:

It came to my attention that one of my formulas are already out there that I discovered 30 years ago.
http://www.axisandallies.org/forums/index.php?action=profile;u=185969 has also discovered the formula P^2*N=S
And just for fun you can try these formulas also. S/P^2=N. √(S/N)=P
P=POINTS
N=NUMBER OF UNITS
S=STRENGTH OF ONE KIND OF UNITS IN A TERRITORY
This formula should replace the punch formula. It is much better then the punch formula.

Now the next formula is (P100)/(C^26)=S
P=POINTS
C=COST
S=STRENGTH OF THE UNIT BASED ON COST
With this formula you can also price units according to their strength. √((P100)/(S6))=C
This formula is for points. (S*(C^2*6))/100=P

For better results for some of these formulas, have all your units cost ten times then what they are. These are some of the VANN FORMULAS I came up 30 years ago.

If you have any questions about these formulas, please ask.

I found how you can get the main part of Vann formula or Baron-Larrymarx according to a specific unit as benchmark.

I took the Fighter A3 D4 C10 and I wanted to convert into Tank A3 D3 C6 as benchmark (Baron-Larrymarx formula).

Then I saw what I did.

Power (of attacking Fighter): A3 * C6 (cost of Tank)/C10 (cost of Fg) * 1 Hit Point C6 (cost of Tank)/C10 (cost of Fg) = 1.08
You can reduce this equation because (cost of Tank)(cost of Tank)/ (cost of Fg)*(cost of Fg) is same to
(cost of Tank) IPCs^2 / (cost of Fg) IPCs^2 and give a simple ratio.

C6^2*A3/C10^2 = 1.08
36 squared IPCs 3 Power * 1 Hit /100 squared IPCs = 1.08 PowerHit Point

This explained what is hidden in Baron-Larrymarx formula:
Offence or defence strength factor= 36*Power/Cost^2.

The whole Enigma formula is
Refence unit Cost^2Power of the actual unit1 HP/Cost of the actual unit^2

So, the Basic offence or defence strength factor result (1.08, in this case) is express in Power*Hit Point
1^2*Power (of a given unit)*1 hit/Cost (of this same given unit)^2

And this formula can be adapt according to any benchmark, for instance a 1 IPC unit:
131 hit/10^2 = 0.300

And this is a very small number. That’s why Vann formula:
Strength= (Power100)/(Cost^26)

add an arbitrary 1001/6= 16.667…
So, 16.667131 hit/10^2 = 0.5
And this would provide the Fighter strength attack factor based on an hypothetical benchmark unit of √16.667 = 4.0825 IPCs.
A 5 IPCs revised Tank in Vann formula gives a Strength : 16.66731 hit/5^2 = 2.00 powerhit

Can you elaborate on the ship calculations?

Destroyer strength: .30144/8^2  = 0.675
Cruiser    strength: .60144/12^2= 0.600
Battleship strength: .701442.618/20^2 = 0.660

These numbers means that Destroyer is the most optimized unit for combat to buy for each IPC invested, then it is battleship and finally Cruiser.
Said otherwise, Cruiser is sub-optimal for the cost.
3 DDs C8 A3 D3 (A9 D9, 3 hits) will be stronger than 2 Cruisers C12 A6 D6 (A12 D12, 2 hits) if you can use a Battlecalc to test D10-sided values.

From stronger to weaker for 120 IPCs basis:
15 DDs A3 D3 (A45 D45)
6 BBs A7 D7 (A42 D42)
10 CAs A6 D6 (A60 D60)

Here are some nice models that could be used for adding generals to AA games.

Go to shapeways.com/product/LKWVTVBJC/global-set?optionId=55887495

Here’s what you get with the set:

Set of 37 pieces representing the generals and admirals for each army in WWII. Scaled to be compatible with Axis & Allies board game. Includes the following pieces, broken down by army:

United States: 1 General Patton, 1 General MacArthur, 1 Admiral Halsey, 2 US Generals (Eisenhower model), 2 admirals in dress blues, 1 admiral in dress whites.

United Kingdom: 2 UK Generals (Montgomery model), 1 generic general (Eisenhower model), 2 admirals in dress whites, 1 admiral in dress blues.

Soviet Union: 2 Soviet generals, 2 Soviet generals with winter greatcoat, 1 Soviet general with winter greatcoat and fur hat, 1 admiral in dress blues.

France: 2 French generals, 1 admiral in dress blues.

China: 1 general (Japanese general model)

Germany: 2 German generals, 3 German generals with winter greatcoat, 1 admiral in dress blues.

Italy: 1 Italian general, 1 admiral in dress whites.

Japan: 2 Japanese admirals, 3 Japanese generals.

A&A generals.jpg