Need Great War in scale AA 3D printed pieces

@smith-family-agoge Welsome to A&A.org! Check out my thingiverse page, where I’ve remixed, compiled, correctly scaled, and prepped for printing some of the best/most relevant units for Axis and Allies: https://www.thingiverse.com/thing:3903067

AA_compilation.png

IMG_7203.JPG
Hi all, here are the latest additions to the ever-growing “Affordable Armory” :)

In addition to beginning to print in Gray and Black as well as the original White, I’ve also newly designed an Anti-Aircraft Gun (similar to OOB), a Kriegsmarine Escort Ship (Type 39 Torpedo Boat), and I’m printing the Royal Navy Hunt-Class light Destroyers (original model by AntarcticFox on thingiverse) for the Allied side as well.

While I work on a few bigger things (Light Tanks, Escort Carriers, Rail Depots, Coastal Artillery…) there are also some new miscellaneous bits as well: Oil Drums, Naval/Landmines, “Czech Hedgehog” anti-tank obstacles, and Metal Bars/Ingots. Come take a look at www.Etsy.com/shop/NathanDetr0itDesigns!

I’m currently building my Global War set, and I’m painting a lot of pieces to make pieces of a certain color that are not available. (i.e. Orange submarines). I’ve found good matches for most of the colors, but I’m having trouble with two sets in particular:
-Classic Japanese/HBG Yellow Gold
-Revised UK/HBG Celery Green

Has anyone found paints that are decent matches for these color pieces? Can be spray, or brush on paint. Don’t have to be perfect matches, just close enough that you can tell what nation the pieces belong to.

Thank you for the information @vodot . Yes the AAA infantry pieces would be hard to print.
Looking at an 3D printer like the ANYCUBIC Photon S 3D Printer, UV LCD Resin Printer with Dual Z-axis Linear Rail and Upgraded UV Module & Print Quietly and Off-line Printing, Build Size 4.53"(L) x 2.56"(W) x 6.49"(H).

https://www.amazon.com/ANYCUBIC-Photon-Upgraded-Off-line-Printing/dp/B07RY6NSL8/ref=sr_1_7?keywords=3d+sla+printer&qid=1576351692&sr=8-7

I think this one will do well with most AAA pieces.

The key that I’ve seen is the dam rifles like to peel from use and I do use my pieces a lot. So main reason why I asked if there was a better sticking primer.

With some specific parts of pieces, I think moderate chipping and flaking of paint is going to be inevitable, especially with the rifle ends of the infantry pieces.  Those end pieces (the rifle barrels) flex and bend around when being handled.  Therefore, you need to find a flexible primer and paint to work with that flexing.  Latex paint is one type that comes to mind.  This type of paint is used heavily by scale RC airplane guys (me included).  As a scale RC airplane is flying in the air, the wings and control surfaces get flexed.  Furthermore, fluctuations in temperature and humidity make the wooden structure of the RC plane expand and contract.  They need a paint that works with all this flexing and contracting so that the paint doesn’t flake off and chip away.  Latex paint.

I have not tried it on scale miniature game pieces, so I cannot say with certainty if it works just as well in this arena.  All you can do is try it and see.

Cheers,
Busarider

Thanks for the support!

Which nation next…well for the next snowy day! Once you start it’s like…why stop there right! I dunno… will be a while till I pick up a paint brush again. Our game is in process at the moment.

RKKA, will post a pic in a few weeks when I get back to the game table. It’s early days in our game so all pieces are almost all there.

BH

I’ve updated the approximates sizes/scales for some basic and alternate units.  Keep in mind that many classes of ship and aircraft, though in the same class, varied in size so my sizes will be off on some units.  If your like me I want to be able to visually distinguish between units quickly so keeping classes similar in size I find works the best. Below is my guide/attempt to standardize my pieces where they are relatively the same size for their respective class.  I’ve added some alternative classes that I use in my games and ties in some of the alternate pieces that HBG is putting out.  If you need something scaled and not sure how to do it let me know and I’ll do my best to help.

Carrier 6.5 cm 1/3700
Light/Escort Carrier 5cm 1/3100
Battleship 6 cm 1/4000
Cruiser 5.5 cm 1/3700
Light Cruiser 5 cm 1/3400
Destroyer 4.8 cm 1/2400

(cm is for the wingspan)
Heavy Bomber 4.7 cm 1/700
Medium Bomber 3.5 cm 1/600
Light Bomber 1.7 cm 1/600
Heavy Fighter (Twin engine) 2.8 cm 1/600
Fighter 2.2 cm 1/500
Light Fighter 1.7 cm 1/600
Dive/Torpedo Bomber 3 cm 1/500

Sorry can’t help you with this one.  I have no talent in this matter…