AAG40 FAQ

Any territories on the European map count.

I’ve read on the forum where a destroyer can block ship movements but I don’t see anything in the rules to confirm this. If I have 8 ships in a sea zone and attack a destroyer with 2 and take it out can’t I then move through that sea zone with the other 6?

@Jeff28:

What territories are in the British NO for hold org. European territories?

I assume Scotland, England, Gib

Is Malta European?

Cyprus?

@SAS:

Any territories on the European map count.

Not exactly.  The NO says “if the United Kingdom controls all of its original territories in its European economy”.  The UK European Economy, as defined in Alpha 3, consists of all of the territories controlled by United Kingdom on the Europe map except for West India, plus any territories in North America that it may control on the Pacific map.

@crusaders1:

I’ve read on the forum where a destroyer can block ship movements but I don’t see anything in the rules to confirm this. If I have 8 ships in a sea zone and attack a destroyer with 2 and take it out can’t I then move through that sea zone with the other 6?

Yes, in noncombat movement.  A destroyer, or any other surface warship, will only block movement during a movement phase in which it exists.  In your example, the destroyer exists in the Combat Move phase and therefore blocks movement in that phase.  However, it is destroyed in the Conduct Combat phase, and therefore does not exist and cannot block movement in the Noncombat Move phase.  If your two ships failed to eliminate the destroyer, it would still exist and block movement in the Noncombat Move phase.

It should be noted that movement blocking works a little differently in the two movement phases.  In combat movement, blocking means that a sea unit may enter the sea zone containing the blocking unit in order to attack it, but must end its movement there.  In noncombat movement, blocking means that a sea unit may not enter the sea zone containing the blocking unit at all.  Of course, submarines are an exception.

Hey guys, I’ve got a question about choosing casualties if there are 2 or more powers in the same alliance involved in a battle.
How are casualties picked if e.g. Japan attacks china which has uk and china troops? Do the allies have to come to an agreement and pick the casualties or…? Thanks!

Also, can you move units that have already participated in the combat phase. e.g. you have won a battle in libya and there are 2 tanks remaining. Can you use those tanks to blitz through other territories?

Finally, does unloading count as a move for a transport? E.g. I have a transport that has moved through two seazones. Can it unload into a adjacent land territory? Thanks a bunch! :)

Thanks for answering. I got one last question my mind. Is it true that a player can only scramble fighters and tact bombers only if the airbase is operative? What if it is damaged ( 1 marker ) or unoperative?

The air base has to be repaired for it to be used, so at the purchase and repair phase if you want to scramble then you need to pay for repairs
Page 10 in the Pacific rulebook and page 12 in the Europe rulebook

Thank you. That clears up alot and I really appreciate your help! I have one final question though regarding the new AA gun rules in alpha 3.

"Air Defense: AA guns can only fire at an air unit when that unit attacks the territory containing that AA gun. AA guns fire only once, before the first round of combat. Each AA gun in the territory may fire up to three times, but only once per attacking air unit. In other words, the total number of air defense dice rolled is three times the number of AA guns, or the number of attacking air units, whichever is the lesser. Once the number of air defense dice is determined, the dice are rolled. For each 1 rolled, the attacker must choose one air unit as a casualty. These casualties are removed immediately, and will not participate in the remainder of the battle. This AA gun attack is made immediately before normal combat occurs in the territory containing the AA gun. AA guns do not defend facilities against strategic or tactical bombing. Facilities have their own built in air defenses. "

I don’t understand the bit about the AA gun firing up to three times. The previous sentence just stated that it only fires once… and what does it mean that the total number of air defense dice rolled is 3x the number of AA guns? What is this air defense dice? I’m sorry but I’m completely confused about this entire paragraph. I understand that the AA Gun’s hit value is 1 and it fires first before any other units, but I do not understand about this " three times" firing. I also noticed that In alpha 3, a territory now can have multiple aa guns.Can anyone explain this?

@Gamerman01:

@dcandf5:

Finally, does unloading count as a move for a transport? E.g. I have a transport that has moved through two seazones. Can it unload into a adjacent land territory? Thanks a bunch! :)

Yes a transport can move two spaces and also unload. That unload is not counted as a movement space.

You will want to note the following, also:
Once a transport has unloaded anything it cannot move or load or anything for the rest of the power’s turn. The transport could unload on different powers’ turns in the same game round if allies are moving their units off on their own turns.

What about loading troops? Does loading count as a move for land units. E.g. An infantry has moved one space already can it load into a transport?

@dcandf5:

Thank you. That clears up alot and I really appreciate your help! I have one final question though regarding the new AA gun rules in alpha 3.

"Air Defense: AA guns can only fire at an air unit when that unit attacks the territory containing that AA gun. AA guns fire only once, before the first round of combat. Each AA gun in the territory may fire up to three times, but only once per attacking air unit. In other words, the total number of air defense dice rolled is three times the number of AA guns, or the number of attacking air units, whichever is the lesser. Once the number of air defense dice is determined, the dice are rolled. For each 1 rolled, the attacker must choose one air unit as a casualty. These casualties are removed immediately, and will not participate in the remainder of the battle. This AA gun attack is made immediately before normal combat occurs in the territory containing the AA gun. AA guns do not defend facilities against strategic or tactical bombing. Facilities have their own built in air defenses. "

I don’t understand the bit about the AA gun firing up to three times. The previous sentence just stated that it only fires once… and what does it mean that the total number of air defense dice rolled is 3x the number of AA guns? What is this air defense dice? I’m sorry but I’m completely confused about this entire paragraph. I understand that the AA Gun’s hit value is 1 and it fires first before any other units, but I do not understand about this " three times" firing. I also noticed that In alpha 3, a territory now can have multiple aa guns.Can anyone explain this?

In short, AA guns may now only fire at a maximum of three aircraft each.  They still only fire once before any normal combat round, but each AA gun can only fire at a maximum of 3 aircraft while in earlier editions they fired at all aircraft attacking the territory.  That means that if you have two AA guns in a territory and your opponent attacks with 8 aircraft, you roll 6 dice for your 2 AA guns before the combat begins and any 1s rolled count as hits; your opponent now chooses which aircraft take the hits.

However, for strategic bombing raids, bases and industrial complexes are considered to have their own air defenses which fire at all attacking aircraft in a strategic bombing raid, and is not dependent on the number of AA guns in the territory.

@dcandf5:

@Gamerman01:

@dcandf5:

Finally, does unloading count as a move for a transport? E.g. I have a transport that has moved through two seazones. Can it unload into a adjacent land territory? Thanks a bunch! :)

Yes a transport can move two spaces and also unload. That unload is not counted as a movement space.

You will want to note the following, also:
Once a transport has unloaded anything it cannot move or load or anything for the rest of the power’s turn. The transport could unload on different powers’ turns in the same game round if allies are moving their units off on their own turns.

What about loading troops? Does loading count as a move for land units. E.g. An infantry has moved one space already can it load into a transport?

Any land units that have already moved may not be loaded onto transports that turn.  This also counts for mechanized infantry or tanks that have only moved one space.  Only land units that are already in a territory adjacent to the transport’s movement without having moved themselves may be loaded onto that transport.

@Cmdr:

@Larry:

The target is considered inoperable if it receives any hits. It can be repaired by paying 1 IPC for the removal of each chip. This is done during the players next Purchase & Repair phase 1.
The maximum damage a major IC can receive is 20 damage markers. Minor ICs and bases can’t receive more than 6 damage markers each.

Unless something changes, this is the current discussion on SBR damage.  In effect, 1 IPC damage to an industrial complex or base renders the entire facility unusable until it has been repaired.  If you cannot afford or choose not to repair an industrial complex or base, then it remains unusable.

@Larry:

Also being considered:
Major industrial complexes can mobilize up to 10 units per turn minus the number of damage markers they have. For example a major IC with 6 damage markers can produce only 4 units. A major IC can only receive up to 20 damage markers, after that they are no longer assigned. A major IC with 20 damage markers would have to remove 11 of them before it could build 1 new unit.

This was added later after pressure was brought to bear by the community.

Has this been changed at all or are current Alpha 3 rules that you can’t build anything while any damage is present on an IC?

Thank you. You summed it up really well.

@SAS:

@dcandf5:

Thank you. That clears up alot and I really appreciate your help! I have one final question though regarding the new AA gun rules in alpha 3.

"Air Defense: AA guns can only fire at an air unit when that unit attacks the territory containing that AA gun. AA guns fire only once, before the first round of combat. Each AA gun in the territory may fire up to three times, but only once per attacking air unit. In other words, the total number of air defense dice rolled is three times the number of AA guns, or the number of attacking air units, whichever is the lesser. Once the number of air defense dice is determined, the dice are rolled. For each 1 rolled, the attacker must choose one air unit as a casualty. These casualties are removed immediately, and will not participate in the remainder of the battle. This AA gun attack is made immediately before normal combat occurs in the territory containing the AA gun. AA guns do not defend facilities against strategic or tactical bombing. Facilities have their own built in air defenses. "

I don’t understand the bit about the AA gun firing up to three times. The previous sentence just stated that it only fires once… and what does it mean that the total number of air defense dice rolled is 3x the number of AA guns? What is this air defense dice? I’m sorry but I’m completely confused about this entire paragraph. I understand that the AA Gun’s hit value is 1 and it fires first before any other units, but I do not understand about this " three times" firing. I also noticed that In alpha 3, a territory now can have multiple aa guns.Can anyone explain this?

In short, AA guns may now only fire at a maximum of three aircraft each.  They still only fire once before any normal combat round, but each AA gun can only fire at a maximum of 3 aircraft while in earlier editions they fired at all aircraft attacking the territory.  That means that if you have two AA guns in a territory and your opponent attacks with 8 aircraft, you roll 6 dice for your 2 AA guns before the combat begins and any 1s rolled count as hits; your opponent now chooses which aircraft take the hits.

However, for strategic bombing raids, bases and industrial complexes are considered to have their own air defenses which fire at all attacking aircraft in a strategic bombing raid, and is not dependent on the number of AA guns in the territory.

Also, if I am correct, AAguns never fire more times than the number of planes, so in the above example with 2 aaguns, if the attacker only sent in 4 planes, only 4 rolls may occur…each plane may only be shot at once basically.