United States Set from Historical Board Gaming!

@CWO-Marc said in HISTORICAL DECALS for American Carriers.:

{snip}
CV-4, Ranger, was America’s first purpose-built carrier, and was twice as fast as Langley, but was about 10,000 tons smaller than the Yorktown class, and as I recall most or all of her WWII service was in the Atlantic/Mediterranean theatre, against two countries (Germany and Italy) with no operational fleet carriers in their navies.

Admiral King, the chief of the US Navy during World War II, wanted to refit the Ranger and send her to the Pacific. When his staff told him that the refit would cost just as much as a new-build Essex-class carrier, he changed his mind. The Ranger would be the only US carrier that was in commission on December 7th, 1941, to not face the Japanese Navy in World War II. Of course, not facing the Japanese Navy in no way prevented the Ranger from seeing action in World War II, just in the North African and European theaters.

-Midnight_Reaper

@bolasgod

Not sure if you triplea but “Global 40 House Rules” has a lot of options. Here’s a link to the “Redesign” thread which has a lot of the ideas:

https://www.axisandallies.org/forums/topic/26089/g40-redesign-currently-taking-suggestions/1609

Also oztea has some in his 42 mod here:

https://www.axisandallies.org/forums/topic/20575/oztea-s-1942-global-setup?page=1

Hey there!

I’m excited to see this expansion! It’s nice to see Canada represented on the board. While it can certainly be argued that they are not big enough to warrant inclusion, Canada did have it’s parts to play in the war. Plus, if the Netherlands can be playable, it’s only right Canada can be as well. I’m also all for more nations on the map. Would love to see something similar done with South Africa, and the Axis minors (Romania, Hungary, Bulgaria, Finland) as well.

In terms of actual impact on the game, I don’t think it will be much at all.

Besides their light infantry units, Canada can essentially only build one land unit per turn the whole game. True, that rule doesn’t include naval or air units, but with Canada making at best +9 IPP’s a turn (unless they capture territory), they aren’t building large amounts of those either. I think you’re kind of at a wash at this point with the negative impact of UK money being taken away and forced to cross the Atlantic, and adding bonus income to Canada, which still needs the means to get to Europe.

From there, I think the further changes are a wash too. The Germans effectively get 4 free submarines. That’s pretty nice for them. I could truly see that altering some initial builds for a German player. It may allow them to focus a bit more on some air or land forces, knowing they have subs waiting.

On the flip side, the fact that Canadian allies can build an aircraft at -2 IPP’s each turn is potentially pretty big. Again, I know they still have to travel from Canada, but when you consider that the UK, ANZAC, USA, Free France (and the Netherlands, if that Expansion is being used) all get that, that’s +8-10 IPP’s income Allies-wide a turn.

@hengst said in Historical Board Gaming Piece Colors:

On this note, is “blonde” or “tan” a better color match for OOB UK G40 pieces?

I think tan is a better match. Blonde is too light a color to be a good match.

-Midnight_Reaper

It’s over here…

http://www.axisandallies.org/forums/index.php?topic=29890.45

…at  Reply #58 on: August 28, 2013, 11:17:27 pm

You guys might want to check these sites out. Or just scroll up above this post.

@Imperious:

I found it.

http://corseceng.com/omni-stand/

This link has everything you need.  I will be using the black 30 mm stand with peg and micro magnets from the above link.

I think for global 40 sets will suffice, possibly 50. Need micro magnets for all the planes ( about 80-90) and 40 for the stands.

@Imperious:

I am combining the resources for making these bases.

This site has the proper magnets. Still looking for metal rods that are pre-cut about 2 inches.

A friend of mine has the most perfect examples. Here is what he did ( reprinted from email).

I bought the magnets from K&J Magnetics…  They were almost the smallest available size with a hole in the center to fit a 1/16" rod.

I drilled holes in pennies, glued 1/16 inch brass rod into them, placed the magnet on top and glued it down.

http://www.kjmagnetics.com/products.asp?cat=10
http://www.kjmagnetics.com/proddetail.asp?prod=RC22  ( this link has the base with 1/8 OD hole)

@Gargantua:

http://www.axisandallies.org/forums/index.php?topic=21083.0

Is a link where YOU personally link the instructional!

Also
http://www.axisandallies.org/forums/index.php?topic=21207.0

@Gargantua:

Somewhere in the customizations section a guy made a whole tutorial, with downloadable PDF’s.

Other Links

http://www.axisandallies.org/forums/index.php?topic=22472.0

http://www.downloadonline.info/dl/870394/magnetic_ac/

Fellow A&A Gamers,

––This thread will eventually contain ALL of the Anzac units that I’ve had detailed & painted by the “WARMACHINE Team”.

––So far the list includes:

ANZAC

ANZAC ARMY
Anzac Infantry
––Anzac (Infantry, Rifle)…(Starting at message #1)
Anzac Armored Vehicles
––M-3 Stuart “Honey” (Tank, Light)…Outback Camo scheme…(Starting at message # )

–-----------------------------------------------------------------------------

Everyone.

----Here are the Anzac Rifle Infantry that Chad Coffman, a.k.a. “Allworkandnoclay”, painted for me. All 20 of the Australian Infantry, nick-named “Diggers”, after their WWI fight at Galipoli, are shown here in a group portrait just after completion by Chad. Note the intricate Anzac ensign he painted on their bases. This guys painting talent is simply awesome! So just sit back, put another shrimp on the barbie, and enjoy, mate.

“Tall Paul”
anzac_inf2b.jpg

this first pic is what i had been using, i manually printed things out in one page sections via “print selection” command and pieced them all together, and laminated them with clear packing tape. Ultimately it proved to be a little larger than the default gameboard like I wanted, but still sloppy looking and with some bumps here and there which complicated unit placement due to tipping or sliding:

it was larger enough than the default board that things in europe didn’t seem so crowded anymore, but shoddy looking still, and that can wear on the nerves.

So I finally said enough is enough, and took the map pdf file on a jump drive down to minuteman press in London Kentucky and had them blow it up and laminate it….it costed $118 IPCs U.S. Dollars.

Its 2 foot by 3 foot, and gives us plenty of room for stacks. I got tired of kenny’s fat fingers knocking over my german stacks and scattering them across europe…he says my money was wasted because “those damn germans were going across europe anyway I just helped you out is all”.

but here it is: