Re: Field Marshal Games Pieces Project Discussion thread


  • @Stickman:

    Wow, that was the fastest Pre-Order sellout I’ve ever witnessed. It should be about six more months before the next batch is ready.  :evil:

    Pre-order sell out for what??  Certainly not these pieces as they havn’t been put up yet afaik.

  • Customizer

    @Stickman:

    Wow, that was the fastest Pre-Order sellout I’ve ever witnessed. It should be about six more months before the next batch is ready.  :evil:

    Yes, he’s talking about the FMG Italians… particularily wicked of him.  :wink:


  • Sorry guys, I had to do it.  :lol:


  • @cminke:

    brown Russian pieces for Italy?

    no there brown germens

    No, they’re brown Germans. :roll:


  • Cminke… Please take more than 5 seconds to post next time. Please.


  • @cminke:

    ok, ok…im sorry but so times i dont notice a(lot) mestakes.

    ill try to take my time for now on.

    so…are we cool?

    I’m sorry, sometimes I don’t notice my own mistakes. I’ll try to take my time from now on.
    …snaps to attention, “Yes, Sir!”  :-D


  • No worries, cminke - we were all young once.

    The best advice I ever had was make all the mistakes you want - but only once!
    (In other words, make sure you never make the same mistake again)

  • TripleA '12

    Bump?

    (sniff sniff…)  :cry:


  • FMG,

    Any sneek peaks of the new dice, or will you be too crunched to put up the pre-orders to match the release of Europe 40?

  • '10

    @Stickman:

    FMG,

    Any sneek peaks of the new dice, or will you be too crunched to put up the pre-orders to match the release of Europe 40?

    Sample pictures of the NEW COMBAT DICE are in another thread in this forum.

    EDIT: http://www.axisandallies.org/forums/index.php?topic=16012.60


  • @FieldMarshalGames:

    @Stickman:

    FMG,

    Any sneek peaks of the new dice, or will you be too crunched to put up the pre-orders to match the release of Europe 40?

    Sample pictures of the NEW COMBAT DICE are in another thread in this forum.

    EDIT: http://www.axisandallies.org/forums/index.php?topic=16012.60

    Finally original italian units!

  • Customizer

    HEY FMG!
    Did you get the production samples yet?  What about the France and ANZAC combat dice?  We’re going crazy waiting to see them and place our orders.

    By the way, do you have a prototype pic of the submarine?  We never got to see that unit.  Or are you just going to wait on that one until you get the production pieces?


  • @knp7765:

    HEY FMG!
    What about the France and ANZAC combat dice?  We’re going crazy waiting to see them and place our orders.

    See three posts up from this one.

  • '12

    I am SOOO ready to lay down the money for these!  Dice, pieces, all.  Go nicely with my custom-stained wood 5’ X 10’ board!!  If y’all’s pieces were going to be custom painted I’d pay FAT money, but…awww who’m I kidding, I’d still pay FAT money!  My only concern was in paying for each set one by one only to see others get them cheaper as an entire set later, but if it helps get them done, I’ll take one for the team and buy them ASAP!  FMG, keep up the AWESOME work!

    Any chance you guys can make Canadian roundels while you’re at it (maybe a later expansion set with Can dice/roundels/setup/pieces)??  If you do, I’ll buy that set too!  :-D
    -Jim

  • '10

    @DFWSupertrooper:

    I am SOOO ready to lay down the money for these!  Dice, pieces, all.  Go nicely with my custom-stained wood 5’ X 10’ board!!  If y’all’s pieces were going to be custom painted I’d pay FAT money, but…awww who’m I kidding, I’d still pay FAT money!  My only concern was in paying for each set one by one only to see others get them cheaper as an entire set later, but if it helps get them done, I’ll take one for the team and buy them ASAP!  FMG, keep up the AWESOME work!

    Any chance you guys can make Canadian roundels while you’re at it (maybe a later expansion set with Can dice/roundels/setup/pieces)??  If you do, I’ll buy that set too!  :-D
    -Jim

    We are working on some surprises also…

  • '12

    @FieldMarshalGames:

    @DFWSupertrooper:

    I am SOOO ready to lay down the money for these!  Dice, pieces, all.  Go nicely with my custom-stained wood 5’ X 10’ board!!  If y’all’s pieces were going to be custom painted I’d pay FAT money, but…awww who’m I kidding, I’d still pay FAT money!  My only concern was in paying for each set one by one only to see others get them cheaper as an entire set later, but if it helps get them done, I’ll take one for the team and buy them ASAP!  FMG, keep up the AWESOME work!

    Any chance you guys can make Canadian roundels while you’re at it (maybe a later expansion set with Can dice/roundels/setup/pieces)??  If you do, I’ll buy that set too!  :-D
    -Jim

    We are working on some surprises also…

    This may have been asked before but why did you use a recon armored car for the Italian mech inf instead of the autoprotetto s37 APC?

    Thanks

  • '10

    @moralecheck:

    @FieldMarshalGames:

    @DFWSupertrooper:

    I am SOOO ready to lay down the money for these!  Dice, pieces, all.  Go nicely with my custom-stained wood 5’ X 10’ board!!  If y’all’s pieces were going to be custom painted I’d pay FAT money, but…awww who’m I kidding, I’d still pay FAT money!  My only concern was in paying for each set one by one only to see others get them cheaper as an entire set later, but if it helps get them done, I’ll take one for the team and buy them ASAP!  FMG, keep up the AWESOME work!

    Any chance you guys can make Canadian roundels while you’re at it (maybe a later expansion set with Can dice/roundels/setup/pieces)??  If you do, I’ll buy that set too!  :-D
    -Jim

    We are working on some surprises also…

    It was more common and more where actually used in Combat during the war.

    This may have been asked before but why did you use a recon armored car for the Italian mech inf instead of the autoprotetto s37 APC?

    Thanks

  • '12

    @FieldMarshalGames:

    @DFWSupertrooper:

    I am SOOO ready to lay down the money for these!  Dice, pieces, all.  Go nicely with my custom-stained wood 5’ X 10’ board!!  If y’all’s pieces were going to be custom painted I’d pay FAT money, but…awww who’m I kidding, I’d still pay FAT money!  My only concern was in paying for each set one by one only to see others get them cheaper as an entire set later, but if it helps get them done, I’ll take one for the team and buy them ASAP!  FMG, keep up the AWESOME work!

    Any chance you guys can make Canadian roundels while you’re at it (maybe a later expansion set with Can dice/roundels/setup/pieces)??  If you do, I’ll buy that set too!  :-D
    -Jim

    We are working on some surprises also…

    Oh YEAH!  I love surprises - especailly from you guys!  Superb QUALITY and attention to detail - very happy with my dice and I’m ordering all my A&A stuff from you guys here on out (including my existing pre-order for the game)!

    -Jim

  • '10

    Where are those Italians? I think they need to be upgraded to mechanized units so they will get here faster!

  • '10

    BIG NEWS NEXT WEEK

    Announcement will be made after the release of AAE40 Next week. (There is already enough excitement on this board)

    I will say no more on the subject…

Suggested Topics

  • 155
  • 40
  • 32
  • 2
  • 13
  • 2
  • 1
  • 2
Axis & Allies Boardgaming Custom Painted Miniatures

301

Online

17.3k

Users

39.9k

Topics

1.7m

Posts