AAG40 TableTop

[LHoffman]

I am intrigued.

I would take on such a project, but I do not know of my time commitment…

How much do you think it would cost you materials wise?

[katfishkris]

whats a good thread to show pics of the table i made?  maybe we should just start a table thread

[WILD BILL]

I was thinking about making a pool table insert. If you make the inner side walls taller, I think it might work. You could then place the entire outer edge over the pool table banks.

[Daedelus]

This is a cool idea.  I think I would be very interested in something like this if it could be adjustable to fit my other games as well.

[johnnymarr]

its a great idea, but i think to sell, you have to have a spot for every power.  nobody wants to combine powers

[knp7765]

I think that table top looks great.  As it is, the table I have is not quite wide enough, just under 30 inches), so my boards have to hang out over the side a little bit.  So there is the fear that any pieces on the edge territories or sea zones may fall off the edge of the earth.  Also, I love the idea of holding all four boards in place so they don’t shift and split apart.
However, I would personally want the sides to be much narrower, like maybe 1 inch all the way around.  I don’t use the game piece boxes and would really not want them up here because it would be wasted space for me.  I put my pieces into these containers I found in the sporting goods section at Walmart.  I think they were originally designed to hold fishing lures and such but they work great for my game pieces.  I have one for each nation, one for the common pieces and even one for my combat dice, although with the addition of France and ANZAC dice I believe I will need a bigger one.

If you could make one like that with the smaller edge, for a cardboard one I would probably be willing to pay $20-$25.  For one made of a more permanent material such a wood or plastic, I would go as high as $40, maybe even $50.

[docfav7]

I have reworked the Table Top and it holds all 10 of the boxes that come with the game system.  The outside demension of the Table Top is 40"x79".

Pics up later tonight.

[reloader-1]

Those are Plano 3750 Boxes - I have 8 of them filled as well  :-D

They are available at Wal-Mart for around $6-10. A great deal, IMHO. (and Made in USA too!)

[docfav7]

I’ll have to check those Plano boxes to see if they will fit in the slots.  I can’t rework it for every different type of box that someone gets.  Will let you know.

Thanks,

[FieldMarshalGames]

@docfav7:

I have reworked the Table Top and it holds all 10 of the boxes that come with the game system.  The outside demension of the Table Top is 40"x79".

Pics up later tonight.

This is an AWESOME idea.  I hope it is sturdy as it will have to hang over most tables.  I think you should have the graphics around each box nation specific?  Also…  it would help in the NOs or some other information was printed beside each box for that nation.

Could I also suggest that there be inserts in two of the corners to hold COMBAT TURRETS?

Very excited to see this project move forward!

[reloader-1]

The Plano boxes will be too big, I think - dont worry about them too much.

[MaherC]

I just made one out of wood, felt, glue.  total cost?  $19.

You need 1 sheet of 5mm plywood from lowe’s (12 bucks)  Have them cut it to 72" x 34".  Keep the scraps.
2 yds of felt from JO-ANN fabric (on sale until 9/11 for $3 per yd)
1 Bottle of elmers wood glue.

Felt on both sides to protect whatever table you are putting it on top of.  Cut the scraps down and glue around the plywood to hold the board in place.  It’s 5mm thick, you don’t need Bob Vila’s workshop to cut the scraps.

[Dr. Shades]

@docfavy:

I have reworked the Table Top and it holds all 10 of the boxes that come with the game system.  The outside demension of the Table Top is 40"x79".

How much will you charge for shipping for one of these?

@reloader-1:

Those are Plano 3750 Boxes - I have 8 of them filled as well  :-D

How do you fit them into the original AAE40 and/or AAP40 boxes?

[McLovin1985]

It looks awesome. Would you be able to fold this to make it easier to transport? I’m too lazy to make one of my own. I’d buy something like this.

[reloader-1]

I have to post a picture of the different Plano boxes I use. The 3750 is a "storage"box, and doesn’t fit inside the A&A box (well, it fits, but none of the storage boxes will!) I have other smaller Plano boxes that fit inside each national box (2 of them per national box).

[reloader-1]

Here are the Pics:

The big box is the Plano 3750, the small one is the Plano 3448 (they make 6 and 4 pocket versions, and I use both)