John Brown's 96x48 Global 1940 Waterproof Metal Map

@Call77 and its not finished like I have said a few times

I have been playing around with different configurations for a custom table and wanted to note some things I’ve landed on that I really like. A main one thing is having the map mounted so that it can slide around as needed on top of a bigger playing area. My table is 65” x 95” in total with a 5.5” arm rest around the outside and the middle is a recessed neoprene surface. I have the OOB Global map mounted on 1/2” rigid foam with a 1/2” aluminum frame around it. This allows the map to slide up close to whoever’s turn it is, but then be in the middle so both players can roll dice In front of them without disturbing the map and in easy view of the other player. (Plus we like lots of room to roll the bones). This ability to adjust the surface along with a standing height, makes it comfortable for long uses because you can move around more and don’t feel as tied down.
Things I’ve learned and changed from original design - I originally used too big of a frame for the map and mounted it on too high of a foam block (you can see these pictures at the bottom) - it made it hard to see the other player’s dice and the big frame took up too much real estate. My global map is mounted on much thinner foam (the framing is bad, you can see if you look closely) but I also used much thinner aluminum angle for the frame. This gives just enough grip when needing to move the map around (I use furniture slides on the bottom, which glide very nicely on the neoprene) but doesn’t make the whole thing too bulky. Having it an inch or so off the surface keeps the dice off, but isn’t so heigh that you can’t see the other player’s dice rolls. When playing other versions (such as Zombies) the board is much smaller, but it can easily swap in and out on the same table since it can move around where ever it is needed or be pushed aside.
I originally made it normal table height, but found long reaches while sitting were harder and it just felt cramped. Standing height with a bar stool is a great way to have the best of both worlds.
The 5.5” rim around the table itself gives you a nice arm rest that doesn’t interfere with the gaming surface. I’m playing with how to best add some cushion to this part - open to suggestions. Sometimes I just lay a piece of leftover neoprene on it.
Dice bounce nice on the neoprene and stay off the floor. It also feels nice and has enough give to allow things to slide but be picked up easily. Wouldn’t definitely go with neoprene again as a surface covering.
I made the drawers open to the inside of the table so you can stay hunched over the action while accessing and stowing stuff away. 50/50 on whether I would keep this if I were to do it again. If I were doing it again, I might try to build customer drawers form scratch using actual drawer glides, but that was beyond my ability when I first did this, so I just used clear plexiglass boxes with aluminum pulls mounted on them. It’s nice having them clear, and I was happy with how the pulls came out, but without glides they can be a little fussy sliding in and out of their slots.
I originally designed the table so that I could put a cover surface back on top when not in use, but find I don’t really ever do that, so if I were to do it again, I might not mess with that part (I never even finished staining those as you can see in the pictures).
CF362D52-269F-4480-8CBB-08139099138F.jpeg A9E12EA1-66EB-4671-86AC-68C62FD30AD5.jpeg 858DE1F2-030A-4D5A-93E4-70A7D1180ADB.jpeg 8F513EE0-DA37-4BA9-880E-4D5EF7BF431F.jpeg F0188165-757B-4CC1-BF67-5045832283C9.jpeg 2E3CD627-0D31-4121-ACF8-682F9F58A40B.jpeg

@655321 decals very small decals and I bought 3 of those sets so there is that. Lol

4E43E286-8F3E-4AC1-84BC-E732B0B7EB2F.jpeg CA95B30E-914A-4105-9C05-22B533ECF2FF.jpeg

I posted this last year, but in case anyone didn’t see it or wants to find it again (wish there was a stickie that appeared each year after Thanksgiving and disappeared after Christmas), here is a World War 2 Christmas themed playlist to play as a background to your A&A games:
https://www.youtube.com/playlist?list=PLHdtjQ501JyX4TbHlIOfjfYjzD11CVhtQ

I’ve also found it to be a neat thing to play in the background while hanging around the house, though my wife’s not too fond of it.  Enjoy!

Thanks everyone for your replies, I finished last night. Really happy with how these turned out.

factories.jpg

@General:

I love the level of detail to the map, have you considered using the Star of India from the British Raj for UK Pacific territories?

Glad you liked the custom map.  No, the idea of giving the British Pacific territories distinct roundels hadn’t occurred to me.  It’s a concept that has potential advantages, for instance because it would highlight Britain’s two-income situation in Global, but on the other hand I like having a single British roundel for the whole world because it highlights the extent of the British Empire.  (A grade-school child back in the1930s or so allegedly wrote in an assignment that “The sun never sets on the British Empire because the sun sets in the west and the Empire is in the east.”)

These pieces look great. I especially like the armor.

Fellow A&A Gamers,

––This thread will eventually contain ALL of the Anzac units that I’ve had detailed & painted by the “WARMACHINE Team”.

––So far the list includes:

ANZAC

ANZAC ARMY
Anzac Infantry
––Anzac (Infantry, Rifle)…(Starting at message #1)
Anzac Armored Vehicles
––M-3 Stuart “Honey” (Tank, Light)…Outback Camo scheme…(Starting at message # )

–-----------------------------------------------------------------------------

Everyone.

----Here are the Anzac Rifle Infantry that Chad Coffman, a.k.a. “Allworkandnoclay”, painted for me. All 20 of the Australian Infantry, nick-named “Diggers”, after their WWI fight at Galipoli, are shown here in a group portrait just after completion by Chad. Note the intricate Anzac ensign he painted on their bases. This guys painting talent is simply awesome! So just sit back, put another shrimp on the barbie, and enjoy, mate.

“Tall Paul”
anzac_inf2b.jpg