Europe '99

I love it!

If you are really looking for a good finish on all your HBG pieces, you could buy a couple small cans of differing lacquers and test each one. $20 should get almost 3 cans worth. It may be a waste to some degree, but at least you can know for sure which one works best.

I have a flat Testors lacquer/sealant spray that I used on Tall Paul’s finished pieces. Granted, these were painted first, so the effect may be thrown off. However, I will say that I did not observe any level of gloss on the HBG or OOB pieces after I applied it. It was quite flat as advertised. FWIW.

@coachofmany:

@AlphaKappa:

@Buran:

I have just received my US units I have attached some photos.  I was just wondering if what the fifth air unit is?  It looks like an F6F Hellcat fighter.  But there is nothing on the website about it.

Nice!  They look pretty good.  How’s the color compared to the OOB stuff?

HBG Olive Drab color is very close to Global 40 2nd Edition IMHO.

I don’t know, Coach!  I just bought a few of your new Shermans from a friend and I was pleasantly surprised that they match my 1st Edition US pieces pretty well.   :wink:

These Sherman sculpts are ace.  You guys did a good job with these and now I’m looking forward to getting some of the other ones too.

EDIT:  Okay, upon closer inspection in daylight, I changed my mind.  They are definitely closer in tone to 2nd Edition US.

I have lots of customization ideas that I can’t see myself creating due to time, resources, or enthusiasm. However, I would like to share them with this community in the hopes that a customizer will like the idea and create it for themselves. I don’t care for any kind on monetary reimbursement if you make money from it, all I ask is that you share with us pictures of your creation.

Cribbage board design on a wooden Aircraft Carrier model used as an Axis & Allies Income Tracker

My vision is of a wooden model aircraft carrier, and on the flight deck is a cribbage board like design where cribbage pegs are used to track income during an Axis & Allies game. I would use 3 peg holes per numerical value and have each nation represented by a colored peg. Black - Germany, Red - Russia, Orange - Japan etc…

This will be the last pictures until the end of the year.

The US EUROPEAN FORCES will be the next set that graces my map, followed by the GERMANS, but it will be awhile before the Axis can get on the board.

I hope you have enjoyed the pictures.

Until next time.

Over and out! :-D

Regarding prices, here are some quotes that I got from two different Southern California print shops  (I had posted this also on the thread entitled Ambilzi & Grasshopper’s 1940 Global Map)

The first print shop provided the following estimates (note the $52 set up fee):

SET UP:  $52.05 ( digital color file set up, latex printer set up)

48" x 105" vinyl $142.63  print digital color 4/0 on white smooth vinyl (15oz)

48" x 105" canvas  $300.13  print digital color 4/0 on canvas

48" x 105" versa fabric  $273.88  print digital color 4/0 on versa fabric

53" x 116" vinyl  $174.63 print digital color 4/0 on white smooth vinyl (15oz)

53" x 116" canvas $368.13  print digital color 4/0 on canvas

53" x 116" versa fabric $335.88 please note: print cannot be any larger, printing on a 54" rolld

A second set of quotes from a different Southern California printing company for printing on vinyl (the type of material used for advertising banners):

48"x105" ,  white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $230.80

53"x116",    white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $258.78

56"x122.5",  white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $277.42

(I might check on the AliBaba website to see what I can find for printing services in China.  Also, I’m checking on the possibility of printing on upholstery vinyl and marine vinyl).

@Tall:

Lucas,

––My friend,…I DO NOT want to hear from you for a month! Please go and take care of your important personal business. I wish you and your soon-to-be wife THE BEST!
––We’ll talk about paint jobs in a month (or so).

Here’s my best wishes to your future happiness.

“Tall Paul”

Haha… I will do my best on that front. Thanks again for the well wishes. I will keep the German aircraft safe at home for the time being.

@Tall:

Guys,

––Here is an “in-process” pic of one of the U.S. Navy APD Fast Transports. These are the famous
“Green Dragon’s” that were re-built from WW-1 ‘four-piper’ Destroyers into Fast Transports to assist the Marine Raiders in their endeavors. The paint scheme utilises “Allworkandnoclay’s” talent to the max. The units are from Shapeways and have had their depth-charge racks removed so as to have the 48-star U.S. Flag applied to their stern decks. More on these six ships as they progress. Enjoy!
––Unless I’m mistaken these are the first highly detailed, painted and decalled SHIPS that the
WarMachine has done so far.

Tall Paul Â

That is definitely a cool looking transport. :-D