3D Printed French and Kamikaze Tokems

Hi @Timothy-Gengarella, I never found good printable artillery files for A&A so I drew up a few, including a generic “Advanced Artillery” piece for use in systems that use them, including GW36.

10aa47fa-e0b8-4900-b813-06e326e547f0-image.png

6aad1843-59e2-4adc-8030-18f58f734f64-image.png

Shot you a PM with some details :)

@Playing-Kid
Not much worse than a creased matt.
Mt first try would be to warm the fold with a hair dryer/heat gun, depending how much heat the vinyl can handle. May help you move the material back into the correct position.
Luck.

Any discounted coupons that are current for printing Maps at Office Depot/Max?

Thank you for the information @vodot . Yes the AAA infantry pieces would be hard to print.
Looking at an 3D printer like the ANYCUBIC Photon S 3D Printer, UV LCD Resin Printer with Dual Z-axis Linear Rail and Upgraded UV Module & Print Quietly and Off-line Printing, Build Size 4.53"(L) x 2.56"(W) x 6.49"(H).

https://www.amazon.com/ANYCUBIC-Photon-Upgraded-Off-line-Printing/dp/B07RY6NSL8/ref=sr_1_7?keywords=3d+sla+printer&qid=1576351692&sr=8-7

I think this one will do well with most AAA pieces.

Hello, in this new replay are the back of the canal and Straits tokem, and the new canal installation. For my house rules, the Suez and Panama canals have an inoperability damage of 3 and a maximum of 10, to repair spent an IPC per point of damage.

Canal.jpg VictoryCityBack (2).jpg

@vodot said in 3D Printers?:

@IWillNeverGrowUp said in 3D Printers?:

For things like factories, shipyards, etc a simple home 3D printer works fantastic.
For things like infantry, it gets dodgy, though you CAN still make it work ok with the right settings.

I use a Monoprice Mini Select V2 (found at https://www.monoprice.com/product?c_id=107&cp_id=10724&cs_id=1072403&p_id=21711).

Under $200, small buildplate (which is perfectly fine for these uses) and out-of-the-box functionality (no need to put anything together, just plug it in and you’re ready to start printing essentially). You can use basically any PLA 3D printing material for great results.

Finding the settings that work best for what you’re doing takes time, as does either MAKING the 3D files (which requires some level of experience) or finding the ones you want to print (thingiverse.com is the best source I’ve found for free to use files).

@IWillNeverGrowUp would you be willing to post some images of parts you’ve printed on the mini? I would love to see some comparisons to the IM OOB bits.

Will do once I get a chance. Just moved into a new place and everything is a disaster here. ;)

DCC,  are you willing to do split sets? As in, im broke and have og factories and only need one type of factory sculpt.
I went to YG site, but my phone wont display the pieces. Anyone mind posting pics?

Have not test printed it yet.  Once I do I will have it on my Shapeways store
IMG_20170402_115607.jpg