Global 1940 Cold War goes Hot Scenario

@baron-Münchhausen

Thanks for telling me. I’ll try it sometime.

Great-looking overlays, and a good reflection of how WWII might have ended if the A-bomb hadn’t been used.  The Americans were planning to invade Japan in two stages, with Kyushu as the first stage (Operation Olympic) and Honshu as the second stage (Operation Coronet), and the Soviets had plans to invade Hokkaido.  Very nice work.

Hi Erocco,
these numbers are based on a formula found during Classic time by Dauvio Vann and his friends, then improved and adjusted to better fit the need of Second Edition units. Here is one link in House Rule:
http://www.axisandallies.org/forums/index.php?topic=40346.msg1684954#msg1684954

Below, you get the whole formula and a short explanation:

@Baron:

@Dauvio:

It came to my attention that one of my formulas are already out there that I discovered 30 years ago.
http://www.axisandallies.org/forums/index.php?action=profile;u=185969 has also discovered the formula P^2*N=S
And just for fun you can try these formulas also. S/P^2=N. √(S/N)=P
P=POINTS
N=NUMBER OF UNITS
S=STRENGTH OF ONE KIND OF UNITS IN A TERRITORY
This formula should replace the punch formula. It is much better then the punch formula.

Now the next formula is (P100)/(C^26)=S
P=POINTS
C=COST
S=STRENGTH OF THE UNIT BASED ON COST
With this formula you can also price units according to their strength. √((P100)/(S6))=C
This formula is for points. (S*(C^2*6))/100=P

For better results for some of these formulas, have all your units cost ten times then what they are. These are some of the VANN FORMULAS I came up 30 years ago.

If you have any questions about these formulas, please ask.

I found how you can get the main part of Vann formula or Baron-Larrymarx according to a specific unit as benchmark.

I took the Fighter A3 D4 C10 and I wanted to convert into Tank A3 D3 C6 as benchmark (Baron-Larrymarx formula).

Then I saw what I did.

Power (of attacking Fighter): A3 * C6 (cost of Tank)/C10 (cost of Fg) * 1 Hit Point C6 (cost of Tank)/C10 (cost of Fg) = 1.08
You can reduce this equation because (cost of Tank)(cost of Tank)/ (cost of Fg)*(cost of Fg) is same to
(cost of Tank) IPCs^2 / (cost of Fg) IPCs^2 and give a simple ratio.

C6^2*A3/C10^2 = 1.08
36 squared IPCs 3 Power * 1 Hit /100 squared IPCs = 1.08 PowerHit Point

This explained what is hidden in Baron-Larrymarx formula:
Offence or defence strength factor= 36*Power/Cost^2.

The whole Enigma formula is
Refence unit Cost^2Power of the actual unit1 HP/Cost of the actual unit^2

So, the Basic offence or defence strength factor result (1.08, in this case) is express in Power*Hit Point
1^2*Power (of a given unit)*1 hit/Cost (of this same given unit)^2

And this formula can be adapt according to any benchmark, for instance a 1 IPC unit:
131 hit/10^2 = 0.300

And this is a very small number. That’s why Vann formula:
Strength= (Power100)/(Cost^26)

add an arbitrary 1001/6= 16.667…
So, 16.667131 hit/10^2 = 0.5
And this would provide the Fighter strength attack factor based on an hypothetical benchmark unit of √16.667 = 4.0825 IPCs.
A 5 IPCs revised Tank in Vann formula gives a Strength : 16.66731 hit/5^2 = 2.00 powerhit

Can you elaborate on the ship calculations?

Destroyer strength: .30144/8^2  = 0.675
Cruiser    strength: .60144/12^2= 0.600
Battleship strength: .701442.618/20^2 = 0.660

These numbers means that Destroyer is the most optimized unit for combat to buy for each IPC invested, then it is battleship and finally Cruiser.
Said otherwise, Cruiser is sub-optimal for the cost.
3 DDs C8 A3 D3 (A9 D9, 3 hits) will be stronger than 2 Cruisers C12 A6 D6 (A12 D12, 2 hits) if you can use a Battlecalc to test D10-sided values.

From stronger to weaker for 120 IPCs basis:
15 DDs A3 D3 (A45 D45)
6 BBs A7 D7 (A42 D42)
10 CAs A6 D6 (A60 D60)

Yup! Scale was perfect for the map…the infantry are too large to fit comfortably in Belorussia or West Russia, but they fit great in France, Italy, Africa, and China! Quality is 3.5/5 stars. Some of the infantry didn’t detach cleanly from the sprue, and the modeling is slightly chunky, but overall the pieces are durable, handsome, and clearly distinguishable.

No the AAA’s ability to reduce aircraft attack power does not stack, but having two AAAs will allow you to reduce the attack value of up to 6 aircraft.  Also, the controlling player (attacker) chooses SBR casualties.

From our limited experience, one fighter usually isn’t enough to deter a SBR.  Remember that there are no longer any AA shots on attacking planes during a SBR so fighters are the only thing the defender has to inflict damage on the attacker.  If he chooses not to intercept due to escorts, the attacker will inflict bombing damage with no losses.  Escorts were used more to take hits from the defending fighters so the bombers would continue to do damage.  A territory defended by an AA gun and a stack of fighters is a hard target and usually not cost effective to bomb unless you have a massive air force.  Germany needs to use it’s full airforce if it wants to SBR England effectively.  Russia needs to actually build fighters or ask for allied fighters if it wants to defend it’s factories.

We could increase the max damage a facility could take to increase the potential damage of a SBR.  We’ll have to play more games with this to see how changes things.

I’m using a house rule from an expansion set for the Global War 1936-1945. The rules didn’t translate very well to the A&A Global 40 game so I wrote some of my own. I have a video which will explain the rule that I will give you a link for. I also made a chart to use the tokens that you get with the set.I’ll provide a link to download the chart if you are interested in using this rule. The file is a re-writeable WORD file so you can change the rules to whatever you want them to be.It only cost me about 6 bucks to have the file printed on both sides and laminated.

Video;
https://www.youtube.com/watch?v=pO8gcDu6Pw4&feature=youtu.be
Chart;
http://www.mediafire.com/file/ys92hu0h082u0zh/American+Minorities+at+War+G+40.docx

Yeah, that’s pretty much what it is.

@calvinhobbesliker:

@Seven_Patch:

Well the IPC value is even between both the Axis and the Allies (except the original global set up of 19 Allies Infantry), I’m hoping it doesn’t throw things off too much.

Glad you like it.

If they have equal ipc’s of units, allies win due to their greater economy

My changes to the additional Global setup pieces are equal so it would just add equal amount of IPC value to the base set up.  I haven’t checked on what the balance is like for the base set up, I would imagine that the Axis have more units to allow the Axis a chance to try and win early while the Allies have to survive until their economic power tilts things back in their favor.

The Allies did win though, historically speaking  :wink:

I give credit to the testers and designers of this game, a game of this size and scale can’t be easy to balance.